POWER SUPPLY, EXTERNAL, 5V, 50W

DPT54

Manufacturer Part NumberDPT54
DescriptionPOWER SUPPLY, EXTERNAL, 5V, 50W
ManufacturerEmerson Network Power
DPT54 datasheet
 


Specifications of DPT54

Power Supply Output TypeFixedPower Rating50W
Input Voltage90V AC To 264V AC / 127V DC To 300V DCOutput Voltage5V
Output Current8AOutput Current 21.5A
Output Current 3500mAMounting StyleDesktop
Output Power Rating50 WOutput Voltage (channel 1)12 V
Output Current (channel 1)9 ADc Output Connector5 Pin DIN
Ac Plug Included/requiredRequiredLead Free Status / RoHS StatusLead free / RoHS Compliant
1
Page 1
2
Page 2
Page 1/2

Download datasheet (647Kb)Embed
Next
DPT50 Series
50 Watts
Total Power:
30 - 50 Watts
Input Voltage:
127 - 300 VDC
90 - 264 VAC
# of Outputs:
Triple
Special Features
• CE Mark EMC & LVD
• Universal AC input
• Fully regulated output
• Overpower and short circuit
protection
• Constant voltage
• High efficiency
• High MTBF
• IEC320 AC receptacle,
3 pin (type C14)
• Built in EMI filter
(CISPR 22 Class B)
• LED power good indicator
• Input power <74 watts
• Complies with EN61000-3-2
Safety
UL UL60950-1
CSA CSA-C22.2 NO. 60950-1
VDE EN60950-1
CE EMC & LVD
CB
Certificate and report
Electrical Specifications
Input
Input range:
90-264 VAC (wide range) 127-300 VDC
Frequency:
47-440 Hz
Inrush current:
<60 A peak @ 230 VAC, cold start @ 25°C
Efficiency:
80% @ typical full load, @115VAC
EMI RFI:
FCC Part 15, Subpart B Class B & EN55022 (CISPR22) Class B
0.5mA @ 50/60 Hz, 264 VAC input
Safety ground
leakage current:
Output
Maximum power:
50 W (DPT51, 30W)
Hold-up time:
10 ms typical at full load @ 115VAC
Overpower protection: Output short circuit protection auto recover.
Overpower protected @ 110 - 160% above maximum rating
Overvoltage
20-45% above nominal output maximum
protection:
Cable/2 meter
DC cable with 5 pin Din
connector:
Environmental Specifications
Operating temperature: 0°C to +40°C ambient. Derate each output as 2.5% per degree from 40°
to 60°C. -20°C start up.
Storage temperature:
-40°C to +85°C
Electromagnetic
susceptibility:
Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
Humidity:
Operating; non-condensing 10% to 95% RH
Vibration:
IEC68-2-6 to the levels of IEC721-3-2
MTBF demonstrated:
>550,000 hours at full load and 25°C ambient conditions
Embedded Power for
Business-Critical Continuity
Rev. 10.2.08_126
DPT50 Series
1 of 2
RoHS

DPT54 Summary of contents

  • Page 1

    DPT50 Series 50 Watts Total Power Watts Input Voltage: 127 - 300 VDC 90 - 264 VAC # of Outputs: Triple Special Features • CE Mark EMC & LVD • Universal AC input • Fully regulated output • Overpower and short circuit protection • Constant voltage • High efficiency • High MTBF • IEC320 AC receptacle, 3 pin (type C14) • Built in EMI filter (CISPR 22 Class B) • LED power good indicator • Input power <74 watts • Complies with EN61000-3-2 Safety UL UL60950-1 CSA CSA-C22.2 NO. 60950-1 VDE EN60950-1 CE ...

  • Page 2

    ... DPT53 +5V 0.5A 8A +15V 0.1A 2.4A -15V 0A 0.5A DPT54 +5V 0.5A 8A +24V 0.1A 1.5A +12V 0A 0.5A 1. Peak current lasting <15 seconds with a maximum 10% duty cycle 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Mechanical Drawing NOTES: 1. Specifications subject to change without notice. ± 2. All dimensions in inches (mm), tolerance is 0.02” ...