BTHQ128064AVD-COG-FSTF-LEDMULT BATRON, BTHQ128064AVD-COG-FSTF-LEDMULT Datasheet - Page 9

• Manufacturer Part Number: BTHQ128064AVD-COG-FSTF-LEDMULT
• Description: LCD MODULE, 128X64, GRAPHIC
• Manufacturer: BATRON

Specifications of BTHQ128064AVD-COG-FSTF-LEDMULT

• Lcd Display Type: FSTN
• Pixel Size (h X W): 0.349mm X 0.418mm
• Interface Type: Serial
• Viewing Area (h X W): 31mm X 50.6mm
• Supply Voltage: 3.3V
• External Depth: 4.48mm
• External: RoHS Compliant
• Display Mode: Transflective
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Backlighting Colour: Red / Green / Blue
• Pixel Pitch (h X W): 0.364mm X 0.433mm

Pin No.
16
17
18
19
20
21
22
23
24
25
26
27
28
R/W(WR) When connected to an 8080 MPU, this is active LOW.
Symbol
E(RD)
RES
CS1
D/C
D7
D6
D5
D4
D3
D2
D1
D0
This is an 8-bit bi-directional data bus that connects to an 8-bit standard MPU
data bus.
When the serial interface is selected (P/S = LOW), then D7 serves as the serial
data input terminal (SI) and D6 serves as the serial clock input terminal (SCL).
At this time, D0 to D5 are set to high impedance.
When the chip select is inactive, D0 to D7 are set to high impedance.
When connected to an 8080 MPU, this is active LOW.
This pin is connected to the RD signal of the 8080 MPU, and the S1D15605
series data bus is in an output status when this signal is LOW.
When connected to a 6800 Series MPU, this is active HIGH.
This is the 6800 Series MPU enable clock input terminal.
This terminal connects to the 8080 MPU WR signal. The signals on the data
bus are latched at the rising edge of the WR signal.
When connected to an 6800 Series MPU:
This is the read/write control signal input terminal.
When R/W = HIGH: Read.
When R/W = LOW: Write.
This is connect to the least significant bit of the normal MPU address bus, and
it determines whether the data bits are data or a command.
D/C(A0)=“High”: Indicates that D0 to D7 are display data.
D/C(A0)=“Low”: Indicates that D0 to D7 are control data.
This is the chip select signal for first chip.
When CS1=LOW and CS2=HIGH, then the chip select becomes active and the
data/commands I/O is enabled.
When RES is set to LOW, the settings are initialized.
The reset operation is performed by the RES signal level.
Table 2(b): Pin Assignment
PAGE 9 OF 16
BTHQ 128064AVD-FSTF-12-LEDMULTI-COG
OCT/2004
Description
BATRON