NL8048BC19-02 NEC, NL8048BC19-02 Datasheet - Page 28

• Manufacturer Part Number: NL8048BC19-02
• Description: TFT DISPLAY, LED, 7"
• Manufacturer: NEC

Specifications of NL8048BC19-02

• Lcd Display Type: TFT
• Interface Type: LVDS
• Viewing Area (h X W): 91.44mm X 152.4mm
• Supply Voltage: 3.3V
• Operating Temperature Range: -20°C To +70°C
• Pixel Size (h X W): 0.19mm X 0.19mm
• Display Mode: Active
• Backlight Type: LED
• Display Technology: LCD
• Luminance: 400cd/m2
• Rohs Compliant: Yes
• Pixel Pitch (h X W): 0.1905mm X 0.1905mm
• Svhc: No SVHC (20-Jun-2011)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6. PRECAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
"6.3 ATTENTIONS", after understanding these contents!
① Take hold of both ends without touching the circuit board when the product (LCD module) is picked
② Do not hook nor pull cables such as lamp cable, and so on, in order to avoid any damage.
③ When the product is put on the table temporarily, display surface must be placed downward.
④ When handling the product, take the measures of electrostatic discharge with such as earth band,
⑤ The torque for product mounting screws must never exceed TBD N⋅m. Higher torque might result in
⑥ The product must be installed using mounting holes without undue stress such as bends or twist (See
⑦ Do not press or rub on the sensitive product surface. When cleaning the product surface, use of the
⑧ Do not push nor pull the interface connectors while the product is working.
⑨ When handling the product, use of an original protection sheet on the product surface (polarizer) is
⑩ Usually liquid crystals don't leak through the breakage of glasses because of the surface tension of
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS" and
∗ Do not touch the working backlight. There is a danger of burn injury.
∗ Do not shock and press the LCD panel and the backlight! There is a danger of breaking,
ionic shower and so on, because the product may be damaged by electrostatic.
distortion of the bezel.
outline drawings). And do not add undue stress to any portion (such as bezel flat area). Bends or
twist described above and undue stress to any portion may cause display mura.
cloth with ethanolic liquid such as screen cleaner for LCD is recommended.
recommended for protection of product surface. Adhesive type protection sheet may change color or
characteristics of the polarizer.
thin layer and the construction of LCD panel. But, if you contact with liquid crystal for the worst,
please wash it out with soap.
up from inner packing box to avoid broken down or misadjustment, because of stress to mounting
parts on the circuit board.
!
because they are made of glass. (Shock: To be not greater 539m/s
11ms, Pressure: To be not greater 19.6 N (φ16mm jig))
sustain a damage, if customer has wrong operations.
wrong operations.
This sign has the meaning that customer will be injured by himself or the product will
This sign has the meaning that customer will be injured by himself, if customer has
!
PRELIMINARY DATA SHEET DOD-PP-0399 (2nd edition)
2
and to be not greater
NL8048BC19-02
28