ADNS-7550 Avago Technologies US Inc., ADNS-7550 Datasheet - Page 27

• Manufacturer Part Number: ADNS-7550
• Description: Optical Mouse Sensor,DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNS-7550

• Mounting Style: Through Hole
• Termination Style: Solder Pin
• Supply Voltage: 5 V
• Operating Temperature Range: 0 C to + 40 C
• Product: Optical
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 516-2180; ADNS-7550

27
LASER_CTRL0
Access: Read/Write
Data Type: Bit field
USAGE: This register is used to control the laser drive. Bits 7 and 6 require complement values in register 0x1F. If the
registers do not contain complementary values for these bits, the laser is turned off and the LP_VALID bit in the
MOTION register is set to 0. The registers may be written in any order after the power ON reset.
Field Name
Range[1:0]
CAL
Force_Disable
Field
Bit
2-0
Range1
7
Description
Rbin Settings
00= Laser current range from approximately 0.9mA to 3mA
01= Laser current range from approximately 2mA to 5mA
11 = Laser current range from approximately 4mA to 10mA
10 = Invalid setting, LPVALID will be set and laser will off.
Laser calibration mode
Reading the Motion register (0x02 or 0x42) will reset the value to 000b and exit
calibration mode.
LASER force disabled
0 = LASER_NEN functions as normal
1 = LASER_NEN output is high.
- Write 101b to bits [3,2,1] to set the laser to continuous ON (CW) mode.
- Write 000b to exit laser calibration mode, all other values are not recommended.
Range0
6
Address: 0x1a
Reset Value: 0x00
Reserved
5
Reserved
4
CAL
3
2
CAL
2
1
CAL
1
0
Force_Disable
0