AFCT-5705LZ Avago Technologies US Inc., AFCT-5705LZ Datasheet - Page 6

• Manufacturer Part Number: AFCT-5705LZ
• Description: LX SFP Std Delatch RoHS
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFCT-5705LZ

• Mounting Type: SFP
• Voltage - Supply: 3.14 V ~ 3.47 V
• Connector Type: LC Duplex
• Applications: Ethernet
• Wavelength: 1310nm
• Data Rate: 1.25Gbd
• Product: Transceiver
• Maximum Rise Time: 400 ps, 260 ps
• Maximum Fall Time: 400 ps, 260 ps
• Pulse Width Distortion: 0.227 ns, 0.267 ns
• Operating Supply Voltage: 3.14 V to 3.47 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 10 C
• Package / Case: SFP-20
• Function: SFP Optical Transceivers with Optional DMI for Gigabit Ethernet
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Singlemode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Electrostatic Discharge (ESD)
There are two conditions in which immunity to ESD
damage is important:
The first condition is static discharge to the transceiver
during handling such as when the transceiver is inserted
into the transceiver port. To protect the transceiver, it is
important to use normal ESD handling precautions in-
cluding the use of grounded wrist straps, work benches,
and floor mats in ESD controlled areas. The ESD sensitiv-
ity of the AFCT-570 Z is compatible with typical industry
production environments.
The second condition is static discharge to the exterior
of the host equipment chassis after installation. To the
extent that the duplex LC optical interface is exposed
to the outside of the host equipment chassis, it may be
subject to system-level ESD requirements. The ESD per-
formance of the AFCT-570 Z exceeds typical industry
standards. Table 1 documents ESD immunity to both of
these conditions.
Electromagnetic Interference (EMI)
Most equipment designs using the AFCT-570 Z SFPs are
subject to the requirements of the FCC in the United
States, CENELEC EN55022 (CISPR 22) in Europe and VCCI
in Japan. The metal housing and shielded design of the
transceiver minimize EMI and provide excellent EMI
performance.
EMI Immunity
The AFCT-570 Z transceivers have a shielded design to
provide excellent immunity to radio frequency electro-
magnetic fields which may be present in some operat-
ing environments.
6
Eye Safety
The AFCT-570 Z transceivers provide Class 1 eye safety
by design. Avago Technologies has tested the trans-
ceiver design for regulatory compliance, under normal
operating conditions and under a single fault condition.
See Table 1.
Flammability
The AFCT-570 Z family of SFPs is compliant to UL 94V-0.
Customer Manufacturing Processes
This module is pluggable and is not designed for
aqueous wash, IR reflow, or wave soldering processes.
Caution
The AFCT-570 Z contains no user-serviceable parts.
Tampering with or modifying the performance of the
AFCT-570 Z will result in voided product warranty. It
may also result in improper operation of the transceiver
circuitry, and possible over-stress of the laser source.
Device degradation or product failure may result. Con-
nection of the AFCT-570 Z to a non-approved optical
source, operating above the recommended absolute
maximum conditions may be considered an act of mod-
ifying or manufacturing a laser product. The person(s)
performing such an act is required by law to re-certify
and re-identify the laser product under the provisions
of U.S. 21 CF.