116637-53 AMETEK, 116637-53 Datasheet - Page 2

• Manufacturer Part Number: 116637-53
• Description: BLOWER, 145MM, 120V, 250W
• Manufacturer: AMETEK
• Series: Windjammerr
• Type: Canisterr

Specifications of 116637-53

• External Height: 157.48mm
• Current Type: AC
• Supply Voltage: 120VAC
• Current Rating: 5A
• Flow Rate: 54l/s
• Power Connection Type: Pins
• Depth: 132.59mm
• External Length / Height: 157.48mm
• Flow: RoHS Compliant
• Air Flow: 130.5 CFM
• Brand/series: IntelliGen™
• Configuration: Bypass
• Controls: Electrical
• Current, Rating: 5 A
• Diameter, Inlet: 1.75 "
• Diameter, Outlet: 1.75 "
• Dimensions: 145Dia x 132.59L mm
• Power, Rating: 250 W
• Special Features: Speed Control
• Static Pressure: 26 in.-H2O
• Temperature, Operating, Maximum: +50 °C
• Temperature, Operating, Minimum: 0 °C
• Termination: Terminals
• Voltage, Rating: 120 VAC
• Weight: 6 lbs.
• Outer Diameter: 145mm
• Flow Rate - Imperial: 115cu.ft/min
• Flow Rate - Metric: 522m3/h
• Rohs Compliant: Yes
• External Depth: 132.59mm
• Lead Free Status / Rohs Status: RoHS Compliant part

5.7” (145mm) BLDC Bypass Blower
• Maximum Approximate Weight: 6 lbs.
• Regulatory Agency Certification: Underwriters Laboratories, Inc. is qualified per UL507 under File E-94403; Canadian Standards Association is qualified per
• Miscellaneous: Intake & exhaust tubes, all cooling ducts and vents must not be obstructed. Intake and exhaust are free of grease, oil, or foreign particles.
Mating harness available upon request. Refer to (page 84) for specific part numbers.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The
performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft
Actual performance will vary depending on the operating environment and application. AMETEK Rotron products are not designed for use with volatile, hazardous or
corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical
life support applications. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For product
designed to meet specific applications contact AMETEK Rotron Marketing and Sales.
C22.2#113 under File LR 43448.
Amp housing #640250-6 (to be supplied by customer), mates with post header assembly.
33
250 WATT, 120 VOLT
3
air density (29.92” Hg @ 70° F.).