ICD-U64 Custom Computer Services Inc (CCS), ICD-U64 Datasheet - Page 10

• Manufacturer Part Number: ICD-U64
• Description: SUPPORTED FAMILIES:PIC16F, PIC18F
• Manufacturer: Custom Computer Services Inc (CCS)
• Type: In-Circuit Emulatorr

Specifications of ICD-U64

• Supported Devicespic16fxx And Pic18fxx: KIT CONTENTS
• For Use With: PIC16FXX AND PIC18FXX SERIES PIC MICROCONTROLLER FROM MICROCHIP
• Interface Type: USB
• Contents: Emulation Module
• Kit Contents: IN CIRCUIT DEBUGGER/PROGRAMMER
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Microchip's PIC™ MCUs and dsPIC™ DSCs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 469-1012

Embedded Ethernet
On-board ENC28J60 chip and MMC/SD
card reader.
SPI controlled, 10Mbit/sec, full duplex
Ethernet transceiver IC.
Drivers and example TCP/IP code
included.
CCS Wireless-Ember
Zigbee™ Edition
Introduction to developing ZigBee™ applications for the Ember EM260
processor with PIC16 and PIC18 devices. Includes full communication
protocols with the Ember-ZigBee™stack.
The minuscule EM260 module is a 2.4 Ghz IEEE 802.15.4 compliant
transceiver (3.3V operation) with a SPI interface and Insight Port for
advanced network debugging with Insight Desktop.
Base Station board combines the EM260 module with PIC18LF4620
device that has 10 I/O Pins (3 may be Analog). The two battery-
operated Sensor boards combine the EM260 module with PIC16LF886
device that has 5 I/O Pins (1 may be Analog).
Internet Connectivity Kits
Wireless Kits
NEED NEW
3.3V Ethernet
Controller
The PIC18F67J60 chip offers more
memory at operating voltages of 2.0
to 3.6V and is 10-BaseT (10Mbps)
compliant.
The PIC18F67J60 can run at speeds
up to 40 Mhz and Ethernet transfers
up to 10 Mbit/sec at 3V.
Example programs include a com-
plete web server, e-mail generator
and SD Card Read/Write.
RFID Transponder (Password Protection and can be made Read-Only
or Write-Only)
RFID
Simple read-only and read/write transponder to demonstrate multiple
contactless communication possibilities. A manual with source code
examples explains how to use the drivers, enabling you to quickly
develop your own RFID applications.
RFID Prototype Board has a short range RFID antenna connected to
an external RFID transceiver IC. The RFID prototype board connects
to external components using a four-wire RS485 bus. The RS485
connection on the RFID Prototype board is to accomodate multi-drop/
multinode network of RFID units and other RFID related components
Kit also includes: RFID Prototyping Board, RS485-to-RS232 Prototyp-
ing Board, Two Read-Only RFID Transponders, and One Read/Write
Embedded Internet
Demonstrates TCP/IP and Internet connectivity. Both a 56k
modem and 10MB Ethernet connection provide access to
the Internet.
CCS provides a port of Microchip’s TCP/IP stack and an
API for developing applications.
Examples include a simple web server to allow web clients
to view readings from around the world and a SMTP/E-mail
client to send E-mails.