LTST-C194KGKT Lite-On Electronics, LTST-C194KGKT Datasheet - Page 10

• Manufacturer Part Number: LTST-C194KGKT
• Description: Standard LED - SMD Green 571nm 12mcd 5mA
• Manufacturer: Lite-On Electronics

Specifications of LTST-C194KGKT

• Led Size: 0603
• Illumination Color: Green
• Operating Voltage: 1.9 V
• Wavelength: 605 nm
• Luminous Intensity: 45 mcd
• Mounting Style: SMD/SMT
• Lens Dimensions: 1.6 mm x 0.8 mm
• Package / Case: 0603
• Viewing Angle: 130 deg
• Color: Green
• Millicandela Rating: 65mcd
• Current - Test: 20mA
• Wavelength - Dominant: 572nm
• Wavelength - Peak: 574nm
• Voltage - Forward (vf) Typ: 2.1V
• Lens Type: Clear
• Lens Style/size: Rectangle, 1.15mm x 0.8mm
• Size / Dimension: 1.60mm L x 0.80mm W
• Height: 0.30mm
• Mounting Type: Surface Mount
• Resistance Tolerance: 572nm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Luminous Flux @ Current - Test: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 160-1834-2

BNS-OD-C131/A4
or “ no lightup ” at low currents.
5. Drive Method
Faxu20100122
Part
6. ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED.
Suggestions to prevent ESD damage:
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in
parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit,
in series with each LED as shown in Circuit A below.
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic
lens as a result of friction between LEDs during storage and handling.
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage,
To verify for ESD damage, check for “ lightup ” and Vf of the suspect LEDs at low currents.
The Vf of “ good ” LEDs should be >2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP product.
of those LEDs.
No. : LTST-C194KGKT
Circuit model A
LITE-ON TECHNOLOGY CORPORATION
LED
P r o p e r t y o f L i t e - O n O n l y
Circuit model B
LED
Page :
10
of
12