264-15/T2C4-2NRA Everlight Electronics CO., LTD, 264-15/T2C4-2NRA Datasheet - Page 10

• Manufacturer Part Number: 264-15/T2C4-2NRA
• Description: Standard LED - Through Hole White Water Clear 2250-5650mcd, 20mA
• Manufacturer: Everlight Electronics CO., LTD

Specifications of 264-15/T2C4-2NRA

• Led Size: T-1
• Illumination Color: White
• Lens Color/style: Water Clear
• Operating Voltage: 3 V
• Operating Current: 20 mA
• Lens Shape: Circular
• Mounting Style: Through Hole
• Viewing Angle: 40 deg
• Package / Case: T-1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Revision
LifecyclePhase:Preliminary
LifecyclePhase:
Technical Data Sheet
4. Cleaning
Everlight Electronics Co., Ltd.
Device Number: DLE-0000038








: (1)
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Dip and hand soldering should not be done more than one time
After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or
vibration until the LEDs return to room temperature.
A rapid-rate process is not recommended for cooling the LEDs down from the peak
temperature.
Although the recommended soldering conditions are specified in the above table, dip or
handsoldering at the lowest possible temperature is desirable for the LEDs.
Wave soldering parameter must be set and maintain according to recommended
temperature and dwell time in the solder wave.
When necessary, cleaning should occur only with isopropyl alcohol at room temperature
for a duration of no more than one minute. Dry at room temperature before use.
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of
ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the
assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not
cause damage to the LED
Fluxing
Prehead
Established date:10-01-2008
http\\:www.everlight.com
Release Date:
Expired Period: Forever
264-15/T2C4-2NRA
Established by: Ruby Lin
Rev
laminar wave
1
Page: 10 of 12