RF Connectors RG-8 CRIMP PLUG

CPN-68-8

Manufacturer Part NumberCPN-68-8
DescriptionRF Connectors RG-8 CRIMP PLUG
ManufacturerEmerson Network Power
TypeType N
CPN-68-8 datasheet
 


Specifications of CPN-68-8

GenderPLBody StyleStraight
Terminate ToCoaxial CableMounting StyleCable
TerminationCrimpOperating Temp Range-65C to 165C
Operating Frequency0 to 11Body PlatingNickel
Contact PlatingGoldContact MaterialBrass/BeCu
Body MaterialBrassProduct Length (mm)35.18mm
Impedance50OhmProductConnector
Rf SeriesNShell PlatingNickel
Termination StyleCrimpCable TypeRG 8, RG 213
Connector TypeN Crimp PlugLead Free Status / RoHS StatusCompliant
1
Page 1
2
Page 2
Page 1/2

Download datasheet (112Kb)Embed
Next
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PART NUMBER CABLE TYPE
CPN-68-8
RG-8, 213
Part Number
Cable
CPN-68-8
RG-8, 213 .354 (9.00)
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-833-6287 • www.cambridgeproducts.com
Type N Straight Crimp Type Plug -
“A”
CONTACT I.D.
BODY I.D.
1.385 (35.18)
.093 (2.36)
.293 (7.44)
1. Identify connector parts. (3 piece parts - except bulkheads)
2. Strip cable to dimensions shown. Do not nick braid or center conductor.
Tin center conductor if contact will be solder attached. Do not tin center
conductor if contact is to be crimp attached. A wire stripper of correct size
is recommended for this step. Slide heat shrink (as applicable) and crimp
sleeve onto jacket of cable.
3. Assemble contact onto cable as shown.
Solder Attachment: Solder contact to center conductor through hole us-
ing a minimum amount of solder for a good joint.
Crimp Attachment (where applicable): Crimp contact to center conduc-
tor using recommended crimp hex.
4. Flare braid and slide body assembly over contact and under braid. Then
seat body assembly firmly onto contact. The cable may have to be held in
a clamping fixture. Arrange braid uniformly around crimp stem. Slide crimp
sleeve forward and crimp using recommended crimp hex. Slide heat shrink
forward and shrink (as applicable).
Strip Dimensions
Crimp
“A”
“B”
“C”
Sleeve Hex Crimp Hex
.138 (3.50)
.157 (4.00) .429 (10.90)
Solder or Crimp Contact
FERRULE I.D.
.430 (10.92)
Contact
Recommended
Ergonomic
Crimp Tool
Crimp Tool
.100 (2.54)
24-313
CP-VCT-2511

CPN-68-8 Summary of contents

  • Page 1

    ... CUSTOMER DRAWINGS AVAILABLE UPON REQUEST PART NUMBER CABLE TYPE CPN-68-8 RG-8, 213 Part Number Cable CPN-68-8 RG-8, 213 .354 (9.00) Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-833-6287 • www.cambridgeproducts.com Type N Straight Crimp Type Plug - “A” CONTACT I.D. ...

  • Page 2

    N Connectors Specifications The N connector employs a large diameter threaded interface for excellent strength and reliability. This commercial quality connector handles high power applications such as antenna feeds for radios and cell sites. Termination options include crimp and clamp ...