P11S1Q0EJSX00471MA Vishay, P11S1Q0EJSX00471MA Datasheet - Page 11

• Manufacturer Part Number: P11S1Q0EJSX00471MA
• Description: TRIMMERS & POTENTIOMETERS SFERNICE / P11S 1 Q 0 EJ S X00 470U 20% A E3
• Manufacturer: Vishay
• Type: Potentiometerr

Specifications of P11S1Q0EJSX00471MA

• Resistance: 470Ohm
• Power Rating: 1W
• Tolerance (+ Or -): 20%
• Number Of Turns: 1Turn
• Technology: Cermet
• Mounting Style: Panel
• Termination Style: Pin
• Operating Temp Range: -55C to 125C
• Failure Rate: Not Required
• Shaft Diameter (mm): 4mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 13.1mm
• Product Depth (mm): 12.5mm
• Temperature Coefficient: ±150
• Lead Free Status / RoHS Status: Compliant

www.vishay.com
11
P11S, P11A
Vishay Sfernice
P11 OPTION: CONCENTRIC SHAFTS
The CC concentric shaft versions allies the total flexibility of the P11 modular
system to the advantage of having two separate shafts.
The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules situated
immediately behind the panel, before the spacer module.
The inner 3 mm or 1/8" or 0.07" dia. shaft drives the modules situated after the
spacer module.
Spacer is available with a choice of two spacer thickness:
5.08 mm designations or 2.54 mm designation. See dimensional drawing
ORDERING INFORMATION (First order only for special code creation)
2.54: Mechanical spacer of 2.54 mm
5.08: Mechanical spacer of 5.08 mm
Customer should define witch modules is driven by each shaft (see example of ordering information at the end of the data sheet)
P11 OPTION: DETENT MODULES
The valley detents mechanism is housed in a standard P11
module. Up to 21 detents position available.
Count detents as follows: 1 for CCW position, 1 for full CW
position, plus the other positions forming equal resistance
increments (linear taper) - not equal angles.
Available now: CVID - CVIF - CVIM
Rotational life: 10 000 cycles
ORDERING INFORMATION (First order only for special code creation)
CV1M
CV1M J84
CV1D
CV1F
CV3
CV11
CV21
P11 OPTION: NEUTRAL MODULES “EN”
Neutral or screen module is housed in a standard P11 module.
It is used as a screen between two electrical modules.
The leads can be connected to ground.
ORDERING INFORMATION (First order only for special code creation)
EN
BUSHING
CODE
V
A
F
CV1M
5.08
EN
1 detent at half travel
CV1M with accuracy of center point ± 2 % (all laws except S)
1 detent at CCW position
1 detent at CW position
3 detents
11 detents
21 detents
Neutral module
CV3 - CV11 - CV21
DIAMETER
6.35 (1/4")
3.17 (1/8")
6
Cermet (P11S) or Conductive Plastic Elements (P11A)
OUTER SHAFT DIAMETER
12.5 mm Modular Panel Potentiometers
LENGTH L
12.7 (1/2")
For technical questions, contact:
16
16
SHAFT STYLE
R
R
R
[e-mail]
CVID
DIAMETER
3.17 (1/8")
1.8 (0.07")
3
CVIM
INNER SHAFT DIAMETER
l
L
CVIF
5.08
LENGTH l
22.2 (7/8")
28.5
28.5
Document Number: 51031
Spacer module
CV1 1
2.54
Revision: 31-May-10
SHAFT STYLE
R
R
R
=
= 270 °
n - 1
+ 15 °