P11S1Q0EJSX00471MA Vishay, P11S1Q0EJSX00471MA Datasheet - Page 9

• Manufacturer Part Number: P11S1Q0EJSX00471MA
• Description: TRIMMERS & POTENTIOMETERS SFERNICE / P11S 1 Q 0 EJ S X00 470U 20% A E3
• Manufacturer: Vishay
• Type: Potentiometerr

Specifications of P11S1Q0EJSX00471MA

• Resistance: 470Ohm
• Power Rating: 1W
• Tolerance (+ Or -): 20%
• Number Of Turns: 1Turn
• Technology: Cermet
• Mounting Style: Panel
• Termination Style: Pin
• Operating Temp Range: -55C to 125C
• Failure Rate: Not Required
• Shaft Diameter (mm): 4mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 13.1mm
• Product Depth (mm): 12.5mm
• Temperature Coefficient: ±150
• Lead Free Status / RoHS Status: Compliant

www.vishay.com
9
P11S, P11A
Vishay Sfernice
P11 OPTION: ROTARY SWITCH MODULES
MODULES: RS ON/OFF SWITCH
RSI CHANGEOVER SWITCH
The position of each module is free.
RS and RSI rotary switches are housed in a standard P11 module
size 12.7 mm x 12.7 mm x 5.08 mm (0.5" x 0.5" x 0.2"). They have
the same terminal styles as the assembled electrical modules.
An assembly can comprise 1 or more switch modules.
Switch actuation is described as seen from the shaft end.
D:means actuation in maximum CCW position
F:means actuation in maximum CW position
The switch actuation travel is 25° with a total mechanical travel of
300° ± 5° and electrical travel of electrical module is 238° ± 10°.
Leads finish: Gold plated.
RDS SINGLE POLE SWITCH, NORMALLY OPEN
In full CCW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CW direction.
RSF SINGLE POLE SWITCH, NORMALLY OPEN
In full CW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CCW direction.
RSID SINGLE POLE CHANGEOVER
In full CCW position, the contact is made between 3 and 2 and
open between 3 and 1. Switch actuation (CW direction) reverses
these positions.
RSIF SINGLE POLE CHANGEOVER
In full CW position, the contact is made between 1 and 2 and
open between 1 and 3. Switch actuation (CCW direction)
reverses these positions.
ORDERING INFORMATION (First order only)
RSD
RSF
RSID
RSIF
RSID
Cermet (P11S) or Conductive Plastic Elements (P11A)
SPST: Single pole, open switch in CCW position - 2 pins
SPST: Single pole, open switch in CW position - 2 pins
SPDT: Single pole, changeover switch in CCW position - 3 pins
SPDT: Single pole, changeover switch in CW position - 3 pins
12.5 mm Modular Panel Potentiometers
For technical questions, contact:
ELECTRICAL DIAGRAM
Note
• Common
• Rotary switchs
• Current up to 2 A
• Actuation CW or CCW position
SWITCH SPECIFICATIONS
Switching Power Maximum
Switching Current Maximum
Maximum Current Through Element
Contact Resistance
Dielectric
Strength
Maximum Voltage Operation
Insulation Resistance Between Contacts
Life at P
Minimal Travel
Operating Temperature
[e-mail]
max.
1
RSD
RSF
3
Terminal to Terminal
Terminal to Bushing
CCW POSITION
1
RSID
2
3*
Document Number: 51031
CW POSITION
1*
RSIF
10 000 actuations
- 40 °C to + 85 °C
Revision: 31-May-10
2
0.25 A 250 V ν
0.5 A 30 V =
1000 V
2000 V
62.5 VA ν
15 VA =
10
3
250 V ν
30 mΩ
30 V =
2 A
25°
6
MΩ
RMS
RMS