DSPIC33EP256MU806-I/PT Microchip Technology, DSPIC33EP256MU806-I/PT Datasheet - Page 361

• Manufacturer Part Number: DSPIC33EP256MU806-I/PT
• Description: 64 PINS, 256KB Flash, 28KB RAM, 60 MHz, USB, 2xCAN, 15 DMA 64 TQFP 10x10x1mm TRA
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33EPr

Specifications of DSPIC33EP256MU806-I/PT

• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 51
• Flash Memory Size: 280KB
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: TQFP
• No. Of Pins: 64
• Rohs Compliant: Yes
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 60 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, QEI, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 51
• Program Memory Size: 256KB (85.5K x 24)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 12K x 16
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 24x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 22-5:
 2009-2011 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
dsPIC33EPXXXMU806/810/814 and PIC24EPXXXGU810/814
U-0
U-0
—
—
This bit should be ‘0’ in Device mode.
Unimplemented: Read as ‘0’
SE0: Live Single-Ended Zero Flag bit
1 = Single-ended zero active on the USB bus
0 = No single-ended zero detected
PKTDIS: Packet Transfer Disable bit
1 = SIE token and packet processing disabled; automatically set when a SETUP token is received
0 = SIE token and packet processing enabled
Unimplemented: Read as ‘0’
HOSTEN: Host Mode Enable bit
1 = USB host capability enabled; pull-downs on D+ and D- are activated in hardware
0 = USB host capability disabled
RESUME: Resume Signaling Enable bit
1 = Resume signaling activated
0 = Resume signaling disabled
PPBRST: Ping-Pong Buffers Reset bit
1 = Reset all Ping-Pong Buffer Pointers to the EVEN buffer descriptor banks
0 = Ping-Pong Buffer Pointers not reset
USBEN: USB Module Enable bit
1 = USB module and supporting circuitry enabled (device attached); D+ pull-up is activated in hardware
0 = USB module and supporting circuitry disabled (device detached)
R-x, HSC
SE0
U-0
—
UxCON: USB CONTROL REGISTER (DEVICE MODE)
U = Unimplemented bit, read as ‘0’
W = Writable bit
‘1’ = Bit is set
PKTDIS
R/W-0
U-0
—
(1)
U-0
U-0
—
—
Preliminary
HSC = Hardware Settable/Clearable bit
‘0’ = Bit is cleared
HOSTEN
R/W-0
U-0
—
(1)
RESUME
R/W-0
U-0
—
x = Bit is unknown
PPBRST
R/W-0
U-0
—
DS70616E-page 361
USBEN
R/W-0
U-0
—
bit 8
bit 0