MTCMR-C1-GP-N2 Multi-Tech Systems, MTCMR-C1-GP-N2 Datasheet - Page 12

• Manufacturer Part Number: MTCMR-C1-GP-N2
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N2

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Sprint Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1096

MultiModem rCell Intelligent Wireless Router
Verify Account Activation
Carrier account activation is verified by ensuring that your account with the
respective wireless network carrier is active and the automatic carrier
activation process has been successfully completed. To verify account
activation, perform the following general procedures.
12
Powering Down/Hardware Resetting a MTCBA-C1-EN2 Router
It is recommended to follow the following shutdown sequence, when
possible, prior to a hardware reset or turning off of power to the router.
The shutdown sequence informs the network that the mobile station is
going offline, and saves critical data to the module‘s non-volatile
memory (flash).
AT+CFUN=0 (issue this command)
+WIND:10
Router is now ready to be powered off or reset.
If you do not see the +WIND:10 response, you may need to activate
the unsolicited message by using the command
AT+WUSLMSK=00020000,0
Note:
strength to determine if the problem is the strength of the received
signal.
MTCBA-EV2-EN2 Note:
command AT!STATUS will return several lines of information. The
second from the last response will either be “Modem has registered” or
“Modem has NOT registered”.
1.
Network Registration Verification
Value
+CREG: 0,0
+CREG: 0,1
+CREG: 0,5
Perform the appropriate carrier activation process for the carrier you
are connecting to. Refer to the Carrier Activation Notice supplied
with your router.
If the router indicates that it is not registered, verify the signal
(Wait for this response from the modem)
Network Registration Status
The router is not registered on any network
The router is registered on the home network
The router is registered on a network and it is
roaming
Using a terminal program, sending the
Multi-Tech Systems, Inc. Quick Start Guide