MTCMR-C1-GP-N2 Multi-Tech Systems, MTCMR-C1-GP-N2 Datasheet - Page 6

• Manufacturer Part Number: MTCMR-C1-GP-N2
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N2

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Sprint Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1096

MultiModem rCell Intelligent Wireless Router
6
Warning:
Note:
●
●
●
5.
For Optional Direct DC Power
2.
3.
4.
complete protection, you may want to add additional filtering to the DC
input.
or key-switched “+” source. Connect the power supply to its source
(for example, in a mobile situation, to the vehicle’s DC fuse/terminal
block).
Screw-on the DC power cable into the power connector on the router.
Then attach the two wires at the other end of the DC power cable to a
DC fuse/terminal block in which you are mounting the MultiRouter.
Connect the red wire to the "+" (positive) terminal and the black wire to
the "–" (negative) terminal. Be sure the GND connection is correct.
Screw-on the power lead from the power supply module into the
Using an Ethernet cable, connect one end of the cable to the
ETHERNET connector on the back of the router and the other end to
your PC either directly or via a switch or hub.
If you are connecting a customer’s legacy device to the router,
connect the serial, RS232 cable from the customer’s device to the
RS232 connector on the back of the router.
Depending on the power source, connect either the power supply
module with the appropriate blade or the optional DC power cable.
If you are using the power supply module, remove the protective
shipping cover. Attach the appropriate interchangeable blade piece
to the power supply module.
power connection on the router. Now, plug the power supply into
your power source.
For an application involving a battery, you can use permanent “+”
Over-voltage protection is provided on the device. To ensure
Multi-Tech Systems, Inc. Quick Start Guide