12SWUDC AMPERITE, 12SWUDC Datasheet - Page 2

• Manufacturer Part Number: 12SWUDC
• Description: PCB, Solid State Relay, Control Voltage AC Max. 12 Volt, Control Voltage DC Max. 12 Volt.
• Manufacturer: AMPERITE

Specifications of 12SWUDC

• Brand/series: SWUDC Series
• Contact Form: DPDT-NO⁄NC
• Current, Rating: 10, 15 A
• Function: Timing
• Mounting Type: PCB
• Number Of Pins: 11
• Relay Type: Solid State
• Standards: UL, CSA
• Temperature, Operating, Maximum: 70 °C
• Temperature, Operating, Minimum: -45 °C
• Termination: Plug-In
• Timer Type: Multi-Function
• Timing Range: 72 to 360 sec.
• Voltage, Control: 12 VAC⁄VDC
• Voltage, Rating: 120, 240⁄30 VAC⁄VDC

Solving your relay requirements since 1922
immediately. The timing cycle will begin when the external switch is opened. When the
timing cycle is completed the relay contacts will release. The timing cycle may be reset to
zero during the timing cycle by closing the external switch.
2) With external switch open: Upon application of input voltage and the closure of the
external switch the relay contacts transfer immediately. The timing cycle will begin when
the external switch is opened. When the timing cycle is completed the relay contacts will
release. The timing cycle may be reset to zero during the timing cycle by closing the
external switch.
Delay On Operate and Release:
With the external switch open input voltage is applied. With the closure of the external
switch the delay on operate timing cycle begins and the relay contacts will transfer at the
end of the delay period. With the re-opening of the external switch the delay on release
timing cycle will begin and the relay contacts will transfer at the end of the delay period.
Interval or One-shot:
With the external switch closed input power is applied. The relay contacts transfer
immediately and the interval or one-shot timing cycle begins. When the timing cycle is
completed the relay contacts will release. The timing cycle may be reset to zero during
the timing cycle by removing input power.