83123014 Crouzet USA, 83123014 Datasheet - Page 125

• Manufacturer Part Number: 83123014
• Description: SLDSW 5A NOCBL FLTPBPLSENVBT
• Manufacturer: Crouzet USA

Specifications of 83123014

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PNP version
PNP output: load connected to negative supply
NPN version
NPN output: load connected to positive supply
Installation
"Screened" sensors can be inset in surrounding metal rising flush with
the sensing face. With "non-screened" versions, check that there is no
metal in the immediate vicinity of the sensing face.
European standards define the minimum distance which must be allowed
between two sensors and/or between sensors and surrounding metal
articles so that the sensors will not be affected.
Screened
Electrical connection
Inductive Proximity Detectors – Technical Guide
The sensing face of the sensor must not be positioned below the surface of the metal.
Where two sensors are installed facing one another, a gap of 10 x Sn must be left between the two sensing faces.
free zone
sensor
metal
metal
3-wire DC
Order/Technical Support – Tel: [phone] / FAX: [phone] / www.crouzet-usa.com
Ød1
≥
(4) NO
(2) NC
black cable (NO or NC)
(4) NO
(2) NC
black cable (NO or NC)
Ød1
Products and specifications subject to change without notice.
blue
Brown
brown
blue
Ød1
Load
Load
target
Polarity reversible
The figures given below (which are in line with European standards) are
for mounting in mild steel (A 37) with non-restrictive operating conditions.
Where there are multiple constraints (deposits, temperature, etc)
additional correcting factors will need to be applied.
Non-screened
2 Sn
≥
3 Sn
2-wire AC
Ød1
≥
3 d1
1
Ød1
≥
3 d1
Ød1
2
3
Sn: Nominal sensing distance
d1: diameter of IPD
≥
2 Sn
metal
free zone
target
metal
sensor
blue
brown
load
Earth wire only available
in metal housings
3/117
3