CP1W-TS001 Omron, CP1W-TS001 Datasheet - Page 12

• Manufacturer Part Number: CP1W-TS001
• Description: 2 Pt J,K Thermocouple Expansio
• Manufacturer: Omron

Specifications of CP1W-TS001

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

12
CP1 Adaptor Ethernet Comparison Chart
* Automatically detects the required cable connection type (straight-through or crossover) and configures the connection appropriately.
CP1 Modbus TCP Adapter
Item
Adapter Description
Type
Applicable PLCs
Transmission Distance
Number of units mounted
Supports Default Gateway
Maximum connections per device
Number of nodes on network
Default IP Address
Web Page IP Address Set-up
Port Number
Item
CP1W-MODTCP01-US
Type / Max# of Modbus Slave nodes
Applicable PLCs
Transmission Distance
Number of units mounted in PLC
Communication Method
Maximum connections per adapter - Slave mode
Maximum connections per adapter - Master mode
Current IP Address (Slave mode)
Default IP Address / Web Page Set-up
CX-One or
other software
CP1H/CP1L
Ethernet Communications
Computer
CP1W-ETN01-US
CP1 Ethernet Adapter
10/100 Base-TX
CP1L or CP1H with an available open
Option Port
100 m (distance between hub and
node)
Two (both option ports can be used)
(One for CP1L-L14,CP1L-L20)
No
Two connections (ie: CX-Programmer
and NS HMI)
254
192.168.250.11
http://192.168.250.11 (Default)
9600 (fixed)
FINS-UDP
FINS-TCP
protocol
CP1L
Description
CP1L or CP1H - Modbus TCP Slave or Modbus TCP Master (Not both simultaneously)
100 Base-TX (Can be used as 10 Base-T) / 254 Max Slave Nodes
CP1L-L14, CP1L-L20, CP1L-M30, CP1L-M40, CP1L-M60, CP1H
100 m (distance between hub and node)
2 (1 Modbus TCP Master, 1 Modbus TCP Slave) (CP1L 30 I/O or more or CP1H)
Modbus TCP/IP protocol
3 - (2 Modbus TCP connections & 1 FINS) or (1 Modbus TCP connection & 2 FINS)
1 connection
D1200, D1201 (D1200=1st & 2nd Octets in Hex, D1201 = 3rd & 4th Octets in Hex)
192.168.250.11 / Web Page Set-up: http://192.168.250.11
Industrial
switching hub
W4S1
CP1W-CIF41
CP1 Ethernet Adapter
10 /100 Base-TX (Auto-MDIX) *
CP1L or CP1H with an available
Option Port
100 m (distance between hub and
node)
One (only one unit can be used at
a time)
Yes
Two connections (ie: CX-Programmer
and NS HMI)
254
192.168.250.1
http://192.168.250.1/E00.htm
9600 (can be changed)
PLC
Any third-party
devices supporting
Ethernet/IP, Modbus/TCP
CP1W-EIP01-US
CP1 Ethernet/IP Slave Adapter
10/100 Base-TX
CP1L or CP1H with an available
Option Port
100 m (distance between hub and
node)
One (only one unit can be used at
a time)
No
One (Must be connected to an
Omron CJ/CS Ethernet/IP Master or
Rockwell ControlLogix/CompactLogix
Ethernet/IP Master)
128 Connections
192.168.250.11
http://192.168.250.11 (Default)
2222 (fixed)