NS5-TQ10B-V2 Omron, NS5-TQ10B-V2 Datasheet - Page 179

• Manufacturer Part Number: NS5-TQ10B-V2
• Description: 5 TFT Clr,Serial+USB,Bk 60M
• Manufacturer: Omron

Specifications of NS5-TQ10B-V2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Alarm Monitor Registration
Method
Starting Ladder Monitor
from Alarm/Event Sum-
mary and History
(NS15/NS12/10/8 only)
Tag Update Notification
Message Setting
Time to Switch to System
Menu (NS12, NS10, NS8,
or NS5)
Double-touch interval
(NS15 only)
Analog RGB Output
(NS15 only)
Project Title
Number of Labels
Initial Screen
Initial Label
Alarm/Event Recording
Method
Data Log Recording
Method
Operation Log Recording
Method
Error Log Recording
Method
System Memory ($SB)
System Memory ($SW)
3. Project Tab
4. Password Tab
Level 1
Level 2
Level 3
Level 4
Level 5
Password mode
Time Out
Timeout (min)
Switch Screen when
canceling the authentica-
tion
Switch Screen No.
Item
Item
Item
Displays the allocated addresses of the system bit memory ($SB). P. 6-35
Displays the allocated address of the system word memory ($SW). P. 6-35
Specifies the method for performing monitor registration of alarms
and events.
Specifies whether to start the ladder monitor when an alarm/event
summary or history record is pressed.
Specifies whether to display a confirmation message before start-
ing tag verification when tags are verified while the NS-series PT is
operating.
Sets the time required to switch to the System Menu when two of
the four screen corners are pressed. The time to switch to the Sys-
tem Menu can be set to between 0 and 5 s.
With the NS15, one corner of the screen must be touched twice in
a row to move to the System Menu. The interval between the
touches can be set.
Sets whether to use the analog RGB output. The default setting is
Disable.
Displays the project title.
Displays the number of corresponding labels.
Sets and displays the screen numbers first displayed after the
power is turned ON.
Sets and displays the label number shown on the screen after the
power is turned ON.
Displays the method for recording the alarm/event histories.
Displays the method for recording the data log.
Displays the method for recording the operation log.
Displays the method for recording the error log.
Changes the level 1 password.
Changes the level 2 password.
Changes the level 3 password.
Changes the level 4 password.
Changes the level 5 password.
Selects the password function (including passwords with levels).
Specifies whether user authentication is automatically canceled
after a set time has elapsed.
Sets the timeout time.
Specifies whether the screen is switched automatically when au-
thentication is canceled.
Sets the screen number that is displayed at when authentication
is canceled.
Function
Function
Function
6-1 Operating Modes and System Menu
P. 6-30
P. 6-30
P. 6-31
P. 6-31
P. 6-32
P. 6-32
P. 6-33
P. 6-34
P. 6-34
P. 6-34
P. 6-34
P. 6-34
P. 6-35
P. 6-35
P. 6-36
P. 6-36
P. 6-36
P. 6-36
P. 6-36
P. 6-37
P. 6-38
P. 6-38
P. 6-38
P. 6-38
Page
Page
Page
6-5