NS5-TQ10B-V2 Omron, NS5-TQ10B-V2 Datasheet - Page 250

• Manufacturer Part Number: NS5-TQ10B-V2
• Description: 5 TFT Clr,Serial+USB,Bk 60M
• Manufacturer: Omron

Specifications of NS5-TQ10B-V2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7-2 Inspection and Cleaning
7-2 Inspection and Cleaning
7-4
Clean and inspect the PT periodically to maintain it in optimum condition for use.
The screen visibility will be impaired if the display becomes dirty. Clean the display periodi-
cally using the following methods:
• For daily cleaning, wipe with a soft, dry cloth. Attempting to remove heavy dirt with the
• If dirt cannot be removed using a dry cloth, dampen the cloth sufficiently with a neutral
• Materials such as rubber, vinyl, or tape that are attached to the Unit will leave stains if left
Inspect the PT once every six to twelve months. Shorten the interval between inspections
when using the PT in extreme conditions, such as under high temperatures, high humidity, or
environments subject to large quantities of dust.
Precautions
for Correct Use
cloth may scratch the front panel sheet. Use a damp cloth and wipe the surface again to
remove dirt.
cleaning agent solution (approximately 2%), squeeze the cloth out, and then wipe the sur-
face.
for a long time. If such material is attached to the Unit, remove when cleaning.
Cleaning Methods
Inspection Methods
Never use benzene, thinner, or other volatile solvents, or chemical cloths to
clean the PT.