NT31C-ST143B-EV3 Omron, NT31C-ST143B-EV3 Datasheet - Page 55

• Manufacturer Part Number: NT31C-ST143B-EV3
• Description: 5.7,8-color,dis,stn,black,eng
• Manufacturer: Omron

Specifications of NT31C-ST143B-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Using a Memory Unit
3-5-2
DIP Switch Functions
38
Method of Use
Note
As shown in the figure below, a Memory Unit has two sets of four DIP
switches, and the operation is determined by the DIP switches that are set at
startup.
1. Always confirm that the power to the NT31/NT31C is off before setting the
2. Do not touch the PCB (printed circuit board) directly with bare hands.
The functions of the DIP switches on the Memory Unit are indicated in the
table below.
SW1-1
SW1-2
SW1-3
SW1-4
SW2-1
SW2-2
SW2-3
SW2-4
• SW1
• SW2
Switch
Switch
1
OFF
DIP switches.
2
Disable/enable writing to PT
Disable/enable writing to the Memory Unit
Area (bank) selection of automatic transmission. * OFF: Bank 0
System/Screen simultaneous transmission
Automatic transmission (writing from the Memory
Unit to the PT)
Automatic transmission (writing from the PT to the
Memory Unit)
Manual transmission (Direction of transmission
and bank used selected at the PT touch panel)
Data type to transfer
3
SW1
4
1
OFF
SW2
2
3
4
Function
Function
Factory setting is turned all to off.
Mounting screws
OFF: Not executed
ON: Executed
OFF: Not executed
ON: Executed
OFF: Not executed
ON: Executed
OFF: Screen data
ON: System program
OFF: Disable
ON: Enable
OFF: Disable
ON: Enable
ON: Bank 1
OFF: Disable
ON: Enable
Section 3-5