MY2-02-AC100/110 Omron, MY2-02-AC100/110 Datasheet - Page 16

• Manufacturer Part Number: MY2-02-AC100/110
• Description: RELAY
• Manufacturer: Omron
• Series: MYr

Specifications of MY2-02-AC100/110

• Relay Type: General Purpose
• Contact Form: DPDT (2 Form C)
• Contact Rating (current): 5A
• Switching Voltage: 250VAC, 125VDC - Max
• Coil Type: Standard
• Coil Current: 10mA
• Coil Voltage: 110VAC
• Turn On Voltage (max): 88 VAC
• Turn Off Voltage (min): 33 VAC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 5A @ 220VAC
• Control On Voltage (max): 88 VAC
• Control Off Voltage (min): 33 VAC
• Contact Rating: 5 A
• Contact Termination: Solder Terminal
• Mounting Style: Socket
• Power Consumption: 0.9 VA to 1.1 VA
• Contact Material: Silver
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MY202AC100110

SEV Listings (File No. 99.5 50902.01)
Note: 1. The rated values approved by each of the safety standards (eg., UL, CSA, VDE, and SEV) may be different from the performance char-
PYF-S Installation Notes
■ Tools
A flat-blade screwdriver should be used to mount the cables.
Applicable Screwdriver
● Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)
Examples: FACOM AEF.2.5 × 75E
■ Applicable Wires
Applicable Wire Sizes
0.2 to 1.5 mm
Applicable Wire Type
Solid wires, stranded wires, flexible wires, or wires with ferules can
be used.
(See note 1.)
Conductor diameter d (mm) or length of sides a and b (mm) ≤ 1.9
274
● Flat-blade, Parallel-tip
● Flat-blade, Flared-tip
No. of poles
2
4
*Chamfering the tip of the driver improves insertion when used as an exclusive tool.
2. In the interest of product improvement, specifications are subject to change.
2.5 dia. (3.0 mm max.)
acteristics individually defined in this catalog.
VESSEL No. 9900-(-)2.5 × 75 (No. 9900-(-)3 × 100)
WAGO 210-119
WIHA 260/2.5 × 40
Wires with Ferules
2
<
General-purpose Relay
, AWG24 to AWG16
2.2 ≤ Diameter D (mm) ≤ 3.2 (3.5: see note 2.)
Cannot be used.
Coil ratings
6 to 240 VAC
6 to 125 VDC
(AEF. 3 × 75E)
(260/3 × 50)
MY
Contact ratings
10 A, 250 VAC
10 A, 30 VDC
5 A, 250 VAC
5 A, 30 VDC
Note: 1. If the overall diameter of the wire is less than 2.2 mm, do not
2. If the overall diameter of the wire is over 3.2 mm, it will be
insert the wire past the conductor. Refer to the following di-
agrams.
difficult to use double wiring.
Operations
10 x 10
100 x 10
MY4Z AC; 50 x 10
3
3
3