MY3N-DC100/110 Omron, MY3N-DC100/110 Datasheet - Page 18

• Manufacturer Part Number: MY3N-DC100/110
• Description: RELAY
• Manufacturer: Omron
• Series: MYr

Specifications of MY3N-DC100/110

• Relay Type: General Purpose
• Contact Form: 3PDT (3 Form C)
• Contact Rating (current): 5A
• Switching Voltage: 250VAC, 125VDC - Max
• Coil Type: Standard
• Coil Current: 9.1mA
• Coil Voltage: 110VDC
• Turn On Voltage (max): 88 VDC
• Turn Off Voltage (min): 11 VDC
• Mounting Type: Socket
• Termination Style: Socketable
• Circuit: 3PDT (3 Form C)
• Contact Rating @ Voltage: 5A @ 220VAC
• Control On Voltage (max): 88 VDC
• Control Off Voltage (min): 11 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MY3NDC100110

■ Precautions
Precautions for Connection
• Do not move the screwdriver up, down, or from side to side while it
• Do not insert the screwdriver at an angle. Doing so may break the
• Do not insert two or more wires in the hole. Wires may come in con-
• Insert the screwdriver along the hole wall as shown below.
• If lubricating liquid, such as oil, is present on the tip of screwdriver,
• Insert the screwdriver into the bottom of the hole. It may not be pos-
276
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the coil spring or cracks in the
housing) or cause deterioration of insulation.
side of socket and result in a short-circuit.
tact with the spring causing a temperature rise or be subject to
sparks. (There are two wiring holes for each terminal.)
the screwdriver may fall out resulting in injury to the operator.
sible to connect cables properly if the screwdriver is inserted incor-
rectly.
General-purpose Relay
Screwdriver
MY
General Precautions
• Use the clip to prevent relays floating or falling out of the socket.
• Do not use the product if it has been dropped on the ground. Drop-
• Confirm that the socket is securely attached to the mounting track
• Ensure that the socket is not charged during wiring and mainte-
• Do not pour water or cleansing agents on the product. Doing so
• Do not use the socket in locations subject to solvents or alkaline
• Do not use the socket in locations subject to ultraviolet light (e.g.,
• Do not dispose of the product in fire.
Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of screw-
driver in the fixture rail, and move it in the direction shown below.
ping the product may adversely affect performance.
before wiring. If the socket is mounted insecurely it may fall and
injure the operator.
nance. Not doing so may result in electric shock.
may result in electric shock.
chemicals.
direct sunlight). Doing so may result in markings fading, rust, corro-
sion, or resin deterioration.
Screwdriver
Fixture rail