GRM1885C1H820FA01D Murata Electronics, GRM1885C1H820FA01D Datasheet - Page 152

• Manufacturer Part Number: GRM1885C1H820FA01D
• Description: Cap Ceramic 82pF 50VDC C0G 1% SMD 0603 Paper T/R
• Manufacturer: Murata Electronics
• Type: Flatr

Specifications of GRM1885C1H820FA01D

• Package/case: 0603
• Mounting: Surface Mount
• Capacitance Value: 82 pF
• Dielectric: C0G
• Voltage: 50 Vdc
• Product Length: 1.6 mm
• Product Height: 0.8 mm
• Tolerance: 1 %

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
1. Transportation
150
Notice
Notice
1. The performance of a capacitor may be affected by the
Others
conditions during transportation.
1-1. The capacitors shall be protected against
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
excessive temperature, humidity and mechanical
force during transportation.
(1) Climatic condition
(2) Mechanical condition
• low air temperature: -40 C
• change of temperature air/air: -25 C/+25 C
• low air pressure: 30 kPa
• change of air pressure: 6 kPa/min.
Transportation shall be done in such a way that
the boxes are not deformed and forces are not
directly passed on to the inner packaging.
1-2. Do not apply excessive vibration, shock, and
1-3. Do not use a capacitor to which excessive shock
pressure to the capacitor.
(1) When excessive mechanical shock or pressure
(2) When the sharp edge of an air driver, a
was applied by dropping, etc.
The capacitor dropped accidentally during
processing may be damaged.
is applied to a capacitor, chipping or cracking
may occur in the ceramic body of the capacitor.
soldering iron, tweezers, a chassis, etc.
impacts strongly on the surface of capacitor,
the capacitor may crack and short-circuit.
C02E.pdf
10.12.20