BFC233844104 Vishay, BFC233844104 Datasheet - Page 6

• Manufacturer Part Number: BFC233844104
• Description: Cap Film 0.1uF 300VAC PP 20% 17.5 X 6 X 12mm RDL 15mm Loose in Box
• Manufacturer: Vishay

Specifications of BFC233844104

• Package/case: 17.5(Max) X 6(Max) X 12(Max)
• Mounting: Through Hole
• Capacitance Value: 0.1 uF
• Voltage: 300 Vac
• Dielectric: PP
• Lead Pitch For Radial: 15 mm
• Product Length: 17.5(Max) mm
• Product Depth: 6(Max) mm
• Tolerance: 20 %
• Operating Temperature: -55 to 105 °C

MKP338 4 X2
Vishay
APPROVALS
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to: “Packaging Information”:
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum space for length (I
board is shown in the drawings.
• For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm; Δh = 0.1 mm
• For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm; Δh = 0.1 mm
• For products with 15 mm < pitch ≤ 37.5 mm, Δw = Δl = 0.7 mm; Δh = 0.5 mm
• For products with 15 mm < pitch ≤ 52.5 mm, Δw = Δl = 1.0 mm; Δh = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is
smaller than or equal to the lead diameter of the product concerned.
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”:
Storage Temperature
• Storage temperature: T
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
6
SAFETY APPROVALS X2
EN 60384-14 (ENEC)
(= IEC 60384-14 ed 3)
UL1283; CSA-C22.2 No.8
UL 1283
CB-test certificate
The ENEC-Approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland; and United Kingdom.
stg
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
300 V
300 V
300 V
300 V
max.
Eccentricity
), width (w
Interference Suppression Film Capacitors
AC
AC
AC
AC
For technical questions, contact:
VOLTAGE
www.vishay.com/doc?28171
max.
) and heigth (h
I
max.
= I + Δ
10 nF to 10 µF
10 nF to 10 µF
3.3 nF to 10 µF
10 nF to 10 µF
max.
www.vishay.com/doc?28139
[e-mail]
) of film capacitors to take in account on the printed circuit
h
max.
w
max.
= h + Δ
VALUE
= W + Δ
CBA116
Seating plane
FI 2008038 A1
E109565
E109565
FI 5257 A1
FILE NUMBERS
Document Number: 28118
Revision: 22-Dec-10