0248500000 Weidmuller, 0248500000 Datasheet - Page 9

• Manufacturer Part Number: 0248500000
• Manufacturer: Weidmuller
• Type: Connecting Sleever

Standard accessories for terminals with
tension-clamp technology offer a time-sav-
ing and easy-to-use cross-connection
capability:
Pluggable cross-connections - ZQV
The above-mentioned variants are finger-
touch protected. It should however be
noted that the rated voltage is reduced to
400 V when cross-connections are used.
This limitation applies to, for example:
Terrminals of type ZDU 2.5 to ZDU 35 and
ZDU 2.5-2.
This principle need not to be applied when
the rated voltage of the used terminals is
lower than 500 V.
In these cases, the rated voltage of the
used terminals applies.
This applies to, for example: ZTR 2.5 and
ZTR 2.4/3AN terminals.
Terminals can be skipped as required by
breaking off one or more (max. 60 %) of
the contact elements from the cross-con-
nections.
264
Pluggable cross-connections of Z-series
ZQV 2.5 as 2- to 10-pole combs
and ZQV 2.5/50 - endless (50-pole),
ZQV 4 as 2- to 10-pole combs,
ZQV 6 as 2- to 4-pole combs
and ZQV 6/30 - endless (30-pole),
ZQV 10, ZQV 16 and ZQV 35 as
2-pole combs (jumpers)
ZQV 2.5N als 2- to 10-pole combs
and ZQV 2.5N/50 - endless (50-pole)
ZQV 2.5/…
ZQV 4/…
ZQV 6/…
ZQV 10/2
ZQV 16/2
ZQV 35/2
ZQS 2.5/…
suitable for the ZSI 2.5/2
fuse terminal only
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/5
ZQV 2.5/6
ZQV 2.5/7
ZQV 2.5/8
ZQV 2.5/9
ZQV 2.5/10 1608940000 20
ZQV 2.5/50 1697540000 20
ZQV 4/2
ZQV 4/3
ZQV 4/4
ZQV 4/5
ZQV 4/6
ZQV 4/7
ZQV 4/8
ZQV 4/9
ZQV 4/10
ZQV 6/2
ZQV 6/3
ZQV 6/4
ZQV 6/30
ZQV 10/2
ZQV 16/2
ZQV 35/2
ZQS 2.5/2
ZQS 2.5/3
ZQS 2.5/4
ZQS 2.5/5
Type
Cat. No.
1608860000 60
1608870000 60
1608880000 60
1608890000 20
1608900000 20
1608910000 20
1608920000 20
1608930000 20
1608950000 60
1608960000 60
1608970000 60
1608980000 20
1608990000 20
1609000000 20
1609010000 20
1609020000 20
1609030000 20
1627850000 60
1627860000 60
1627870000 60
1733640000 10
1739680000 50
1739690000 50
1739700000 10
1633200000 20
1633210000 20
1633220000 20
1633230000 20
Qty.
The length of the cross-connections can
be shortened using a suitable cutting tool,
e.g. KT ZQV (Cat. No. 900217). However,
at least three contact elements must
remain.
If the cross-connections are shortened by
the user, partitions and/or end plates
(ZAP/TW…) must be used to maintain the
rated voltage of 250 V, if terminals of type
ZDU 2.5/... are used.
Cross-connections
can be inserted and
replaced quickly
and easily.
Caution:
Do not deform the
contact elements!