AH314-G TriQuint, AH314-G Datasheet - Page 7

• Manufacturer Part Number: AH314-G
• Description: RF Amplifier 2300-2900MHz 23dB
• Manufacturer: TriQuint
• Type: Driver Amplifierr

Specifications of AH314-G

• Operating Frequency: 2.3 GHz to 2.9 GHz
• P1db: 33 dBm at 2.6 GHz
• Noise Figure: 6.4 dB at 2.6 GHz
• Supply Current: 700 mA
• Maximum Operating Temperature: + 150 C
• Number Of Channels: 5 Channels
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1066984

© 2010 TriQuint Semiconductor, Inc.
AH314
2.3-2.9 GHz 2W 5V Linear Driver Amplifier
PC Board Layout
PCB Material: 0.0147” Rogers Ultralam 2000, single layer,
1 oz Cu, ε
spacing = .050”.
The silkscreen markers ‘A’, ‘B’, ‘C’, etc. and ‘1’, ‘2’, ‘3’,
etc. are used as place markers for critical tuning
components
The pad pattern shown has been developed and tested for
optimized assembly at TriQuint Semiconductor. The PCB
land pattern has been developed to accommodate lead and
package tolerances. Since surface mount processes vary
from company to company, careful process development is
recommended.
For further technical information, Refer to
Data Sheet: Rev A 08/27/10
Pin Description
Applications Information
Pin
1
2
4, 5
3, 6, 7, 8, 9, 10,
14, 18, 20
11, 12, 13
15
16
17
19
Backside Paddle
r
= 2.45 Microstrip line details: width = .042”,
Symbol
Iref 1
Vbias1
RFin
GND/NC
RFout
Vcc2
Iref 2
Vbias2
Vcc1
GND
RF/DC ground. Ensure good solder attach for best thermal and electrical performance.
Description
Reference current into internal active bias current mirror. Current into Iref sets device
quiescent current. Also, can be used as on/off control. (for amp 1)
Voltage supply for active bias for amp 1. Connect to same supply voltage as Vcc1.
RF Input
No internal connection. This pin can be grounded or N/C on PCB. Land pads should be
provided for PCB mounting integrity.
RF Output
Supply Voltage for Amp2
Reference current into internal active bias current mirror. Current into Iref sets device
quiescent current. Also, can be used as on/off control. (for amp 2)
Voltage supply for active bias for amp 2. Connect to same supply voltage as Vcc2.
Supply Voltage for Amp1
http://www.triquint.com/prodserv/more_info/default.aspx?prod_id=AH314
- 7 of 9 -
Connecting the Digital World to the Global Network
Disclaimer: Subject to change without notice
®