9-1393792-0 TE Connectivity, 9-1393792-0 Datasheet - Page 353

• Manufacturer Part Number: 9-1393792-0
• Description: Electromechanical Relay DPDT 3A 24VDC 3.872KOhm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-0

• Contact Arrangement: DPDT
• Dc Coil Voltage: 24 V
• Coil Current: 6.2 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 24V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 1.2VDCV
• Coil Resistance: 3.872kohm
• Pick-up Voltage (max): 19.2VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

Max. Switching Power: 35-320 watts DC (voltage dependent)
Min. Recommended Current: 0.5 amp @ 12VDC.
Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts
Expected Life: 10 million operations, mechanical; 100,000 operations at 20
Initial Dielectric Strength
Between Contacts and Coil: 500V rms.
Coil Data
Voltage: 12 and 24VDC.
Resistance: See Coil Data table.
Nom. Power: 0.80 watts @ 23°C coil temp. and rated coil voltage.
Thermal Resistance: 50°C per actual coil watt in still air with no contact
Features
• 20A, 16VDC switching rating.
• 60A inrush at 16VDC.
• 15A continuous contact rating @ 105°C.
• Immersion cleanable plastic case with knock-off nib for ventilation.
• Low profile package has a seated height of only .67‘’ (17mm).
• 1 Form C arrangement.
• Choice of AgNi 0.15 or AgSnO contacts.
Contact Data
Arrangements: 1 Form C (SPDT).
Max. Switching Rate: 20 operations per second with no contact load.
Max. Switching Voltage: 75VDC
Max. Load Current (@ 14VDC Load Voltage):
Coil Data (@23°C Coil Temperature)
Material: AgNi 0.15 - Recommended for inductive loads.
Conditions
All parametric, environmental and life tests are performed according to
EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50%
RH, 29.5 ± 1.0" Hg.) unless otherwise noted.
Dimensions are shown for
reference purposes only.
Max. Continuous Current
Max. Break Current
Max. Make Current
Designator
Coil
12
24
AgNi 0.15
AgSnO - Recommended for high inrush, lamp and capacitive
loads and applications prone to contact material transfer.
AgSnO
Load
amps, 14VDC, resistive load on normally open contact.
(2)
(1)
@ 10 amp contact load.
250 millivolts, maximum, for normally closed contacts
@ 5 amp contact load.
load current.
6 operations per minute for rated life at rated load.
Rated Coil
Voltage
(VDC)
12
24
(1)
.
20A
20A
60A
80A
NO
±10% (Ohms)
Resistance
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Coil
180
720
Form C
Inductance
10A
20A
12A
15A
(1)
NC
(Ref.)
.
Coil
(H)
0.9
3.2
Catalog 1308242
Issued 3-03
Must-Operate
Voltage
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
24V Jump Start: 24VDC for 5 minutes conducting rated contact current
Drop Test: Capable of meeting specifications after a 1.0 meter drop
Flammability: UL94-HB or better (meets FMVSS 302).
Notes
(1) See Figure 1.
(2) Inrush current for lamp load.
(3) Allowable overdrive is rated at ambient temperature of 23°C and 105°C
(4) See Figure 2.
(5) Current and times are compatible with circuit protection by a typical 20A
T72M
20 Amp Miniature
PC Board Relay
for Automotive Applications
Abnormal Operation
Overload Current: 40A, 36 sec.
Operate Data
Must Operate and Must Release Voltage: See Coil Data table.
Environmental Data
Temperature Range: Storage: -40°C to +155°C.
Shock: 20g, 11 milliseconds, half sine wave pulse.
Vibration: (For NC contacts, NO contacts are significantly higher.)
Mechanical Data
Termination: Printed circuit terminals.
Enclosure: Immersion cleanable, sealed plastic cover.
Weight: Sealed: 12 gm (0.4 oz.) approximately.
Audible Sound: 95dBA @ 10 cm, 14VDC coil voltage.
(VDC)
Initial Operate Time: 5 milliseconds, typical, with rated coil voltage
Initial Release Time: 2 milliseconds, typical, with zero volts applied (for
Specifications and availability
subject to change.
12.6
6.3
as stated with a 10A load current flowing through the relay contacts and
minimum coil resistance with power applied for 30 sec. max. (20% max.
duty cycle.) For continuous duty information, see Figure 2. (Ambient
Termerature vs. Coil Voltage for Continuous Duty.)
circuit breaker. Relay will make, carry and break the specified current.
10-40 Hz., 1.27mm double amplitude.
40-70 Hz., 5g's constant.
70-100 Hz., 0.5mm double amplitude.
100-500 Hz., 10g's constant.
onto concrete in final enclosure.
series
77dBA @ 1 M, 14VDC coil voltage.
@ 23°C.
Must-Release
80A, 10 sec.
150A, 2.5 sec.
Voltage
(VDC)
Operating: -40°C to +105°C
applied.
unsuppressed relays after having been energized at
rated coil voltage.)
2.4
1.2
(5)
@ 23°C
24.6
49.3
TYCO ELECTRONICS
Allowable
Overdrive
(4)
(VDC)
.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
(3)
@ 105°C
14.3
28.7
1005