120-8551-308 ITT Interconnect Solutions, 120-8551-308 Datasheet - Page 25

• Manufacturer Part Number: 120-8551-308
• Description: Conn Sure Seal PIN/SKT 8 POS ST 8 Terminal 1 Port
• Manufacturer: ITT Interconnect Solutions
• Type: Sure Sealr

Specifications of 120-8551-308

• Gender: RCP
• Body Orientation: Straight

www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
With CHPZ-240 hand lever insertion press
Mount correct support block and insertion tip to CHPZ-240
insertion press (refer to page 21).
•
•
•
•
Different dimensions for machined contacts are given in paranthesis.
Mini SURE-SEAL
Wiring Instructions
Standard SURE-SEAL
Dip connector body into lubricating fluid and shake off excess
Insert wire into accessories. Pay attention to correct sequence
Insert guiding pins CT317-8588-000 (only for Standard SURE-
Place contact into insertion tip. Contact shoulder has to be
fluid. Open fixing clip and place connector body in support
block (refer to page 18 and 19).
and position (refer to illustration page 24).
SEAL) into socket contacts (refer to illustration page 24).
flush with lower edge of the contact tip.
Plug 2 to 4 contacts
4,2 (3,2)
3,9
±0,4
±0,4
Receptacle 2 to 4 contacts
MSS plug 2 to 4 contacts
7,6
5,7 (4,7)
±0,4
±0,4
4,1
4,1
±0,3
±0,3
CE 4675a
25
•
•
•
•
For Assembly Machines CBITG and CBITS
refer to seperate operating instructions
MSS receptacle 2 to 4 contacts
Adjust height of hand lever press: For first insertion loosen stop
Check fit and position of contacts in insulator.
Remove guiding pins from socket contacts.
Assemble accessories.
at the upper end of the press. Move down lever slowly and
steadily and adjust stop until contact is in the correct position
(refer to page 21). Tighten stop. This adjustment may be used
for both socket and pin contacts. After this adjustment the lever
is simply pressed until stop is reached. Remove terminated
connector from support after all contacts are inserted.
6,2
6,2
±0,3
±0,3
Plug 5 to 10 contacts
4,4 (3,4)
4,2
CE4674a
±0,4
±0,4
SURE-SEAL
Receptacle 5 to 10 contacts
5,3 (4,3)
7,8
±0,4
±0,4
CE 4673a