1-104068-2 TE Connectivity, 1-104068-2 Datasheet - Page 305

• Manufacturer Part Number: 1-104068-2
• Description: Conn Shrouded Header HDR 26 POS 1.27mm Solder ST Thru-Hole Tube
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr

Specifications of 1-104068-2

• Pitch: 1.27 mm
• Number Of Rows: 2
• Number Of Contacts: 26
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Rohs Compliant: NO
• Connector Type: Header
• Shrouded: Yes
• Mount Angle: Vertical
• Pcb Mount Style: Through Hole
• Pcb Mount Retention: Without
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 500
• Termination Post Length (mm [in]): 2.54 [0.100]
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 26
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -65 – +105
• Packaging Method: Tube

Catalog 1307819
Revised 8-08
www.tycoelectronics.com
The electrical, mechanical
and environmental charac-
teristics of the AMPMODU
.031 x .062 [0.79 x 1.57]
Interconnection System are
listed below:
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Performance Specifications
Mechanical Characteristics
Contact Durability
Electrical Characteristics
Contact Current Rating —
5 amperes max. for single contact in free
air, could vary due to ambient tempera-
ture, wire size and duty cycles.
Contact Resistance —
12 milliohms at 100 ma and 50 mv open
circuit.
Dielectric Rating —
At Sea Level – 1200 VAC between con-
tacts on .156 [3.96] centers for 1 minute.
Insulation Resistance — 5 x 10
megohms (initial)
Technical Documents
Various technical docu-
ments are available for your
use:
Product Specifications
describe technical perform-
ance characteristics and
verification tests. They are
intended for the Design,
Component and Quality
Engineer.
108-25016 Interconnection System,
108-25025 Interconnection System,
108-25025-1 Interconnection System,
108-36029 Locking Clip Connectors
Note: All part numbers are RoHS compliant.
Plating
.000016 [0.00041] Min. Tin
.000079 [0.00201] Min. Tin
.000100 [0.00254] Min. Tin
.000015 [0.00038] Gold
.000030 [0.00076] Gold
Standard Pressure
High Pressure, Gold
High Pressure, Tin
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
3
Connector Durability
Receptacles
Mating
Unmating – 1 oz. [0.28N] min. per contact after 3 mating cycles (standard pressure)
Locking Clip Contacts
Mating
Unmating – 2 lb. [8.90N] min. per contact after 3 mating cycles
Environmental Characteristics
Operating Temperature — -65°C to 105°C [-85°F to 221°F] (Gold Plated)
-65°C to 60°C [-85°F to 140°F] (Tin Plated)
Application Specifications
describe requirements for
using the product in its
intended application and/or
crimping information.
They are intended for the
Packaging and Design
Engineer and the Machine
Setup Person.
114-25000 Crimp Snap-In Receptacle
114-25004 Board Mount Receptacle
114-25008 Locking Clip Contacts
114-25011 Machine Applied Straight
– 16 oz. [4.45N] max. per contact after 3 mating cycles
–30 oz. [8.34N] max. per contact after 3 mating cycles
(high pressure, gold)
–60 oz. [16.68N] max. per contact after 3 mating cycles (high pressure, tin)
– 4 lb. [17.79N] max. per contact after 3 mating cycles
200 Cycles
75 Cycles
75 Cycles
75 Cycles
Standard
Pressure
(standard pressure)
3 oz. [0.83N] min. per contact after 3 mating cycles (high pressure)
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Contacts
Contacts
Posts
N/A
Receptacles
100 Cycles
Pressure
25 Cycles
25 Cycles
50 Cycles
High
N/A
Instruction Sheets provide
instructions for assembling
or applying the product.
They are intended for the
Manufacturing Assembler or
Operator.
408-7308 Clinching Procedures for
408-7411 Suggestions for Wave
408-7594 Tyco Electronics Hand Tool
408-7750 Tyco Electronics Hand Tool
408-7676 AMPMODU Locking Clip
408-7671 Tyco Electronics Hand Tool
408-7678 Tyco Electronics Extraction
408-7981 Clinching Procedures for
408-9451 Tyco Electronics Extraction
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
Header Assemblies
Soldering AMPMODU
Receptacles
90274-2 for Crimping
Crimp Snap-In 18-22 AWG
Contacts
90328-1 for Crimping
Crimp Snap-In Contacts
(22-26 AWG)
Connectors and Contacts
90308-1 for Crimping
Locking Clip Contacts
Tool 91104-1 for Locking
Clip Contacts
Receptacle Assemblies
Tool 843473-1 for Crimp
Snap-In Receptacles
25 Cycles
25 Cycles
Contacts
Locking
Clip
N/A
N/A
N/A
305
7