1-104068-2 TE Connectivity, 1-104068-2 Datasheet - Page 311

• Manufacturer Part Number: 1-104068-2
• Description: Conn Shrouded Header HDR 26 POS 1.27mm Solder ST Thru-Hole Tube
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr

Specifications of 1-104068-2

• Pitch: 1.27 mm
• Number Of Rows: 2
• Number Of Contacts: 26
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Rohs Compliant: NO
• Connector Type: Header
• Shrouded: Yes
• Mount Angle: Vertical
• Pcb Mount Style: Through Hole
• Pcb Mount Retention: Without
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 500
• Termination Post Length (mm [in]): 2.54 [0.100]
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 26
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -65 – +105
• Packaging Method: Tube

Catalog 1307819
Revised 8-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Performance Specifications
Dual In-Line Package (DIP) Shunts — 7600 Series
Current Rating —
Standard pressure — 2 amperes for +20˚C rise above ambient (one conductor per shunt
Machine insertable — 1 ampere for +20˚C rise above ambient (one conductor per shunt)
Insulation Resistance — 1x 10
Dielectric Withstanding Voltage — 500 VDC min.
Capacitance — 2 picofarads max. between adjacent straps
Temperature Rating — -55˚C to +105˚C
Terminal Strength (Bend Test) — Two 45˚ bend cycles per MIL-STD-202, Method 211, Condition B
Solder Bridging —
Cut straps can be reconnected by solder bridging. Solder bridging recommendations are:
Post Shunts
Current Rating —
3 amperes max. unless otherwise noted
Temperature Rating — -65˚C to +105˚C (gold) -40˚C to +85˚C (tin)
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-7533
108-1445
108-1476
108-1674
108-9057
108-9062
108-37006
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1045
114-1054
114-1059
114-1074
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-7768
408-3208
408-3230
408-3251
408-3276
•Use low temperature solder (60/40 tin/lead)
•Use solder tip approximately 1/32 [0.79] in diameter
•Do not let solder tip come in contact with plastic material
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dual In-Line Package (DIP) Shunts
2mm Mini Shunt
Economy Shunt, Multiposition Shunt
Dual Beam Shunt
Low Profile Shunt
Tandem Spring Shunt
Novo Shunt with Handle
Tandem Spring Shunt
Dual In-Line Package (DIP) Shunts
Economy Shunt, Dual Beam Shunt, Low Profile Shunt, Multiposition
Shunt
2mm Mini Shunt
Dual In-Line Package (DIP) Shunts
Tandem Spring Shunt
Economy Shunt, Dual Beam Shunt, Low Profile Shunt
Multiposition Shunt
2mm Mini Shunt
10
ohms min. at 100 VDC
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
311
8