104549-6 TE Connectivity, 104549-6 Datasheet - Page 5

• Manufacturer Part Number: 104549-6
• Description: Conn Shrouded Header HDR 40 POS 1.27mm Solder ST SMD Tube
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr
• Series: AMPMODU System 50r

Specifications of 104549-6

• Pitch: 1.27 mm
• Number Of Rows: 2
• Number Of Contacts: 40
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Connector Type: Wire To Board
• Contact Termination: Surface Mount Vertical
• No. Of Contacts: 40
• No. Of Rows: 2
• Pitch Spacing: 1.27mm
• Rohs Compliant: No
• Shrouded: Yes
• Mount Angle: Vertical
• Pcb Mount Style: Surface Mount
• Pcb Mount Retention: With
• Hold-down Post Material: Copper Alloy
• Hold-down Post Plating: Tin-Lead over Nickel
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 500
• Termination Post Length (mm [in]): 2.54 [0.100]
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 40
• Pcb Mount Retention Type: Hold Down Post(s)
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -65 – +105
• Packaging Method: Tube

4.
4.1.
4.2.
4.3.
4.4.
Rev B
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that product meets requirements of Figure 1. Failures attributed to
equipment, test setup or operator deficiencies shall not disqualify product. When product failure occurs,
corrective action shall be taken and samples resubmitted for qualification. Testing to confirm corrective
action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan will specify sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with applicable product drawing and
this specification.
Sample Selection
Samples shall be prepared in accordance with applicable Instruction Sheets and shall be selected
at random from current production. All test groups shall consist of the longest position size of a
right angle receptacle and right angle unshrouded header. Test groups 1 and 3 shall each consist
of 5 samples. Test group 2 shall consist of 3 samples. Test group 4 shall consist of 5 samples not
mounted to printed circuit boards.
Test Sequence
Qualification inspection shall be verified by testing samples as specified in Figure 2.
108-1093
5 of 8