146130-8 TE Connectivity, 146130-8 Datasheet - Page 205

• Manufacturer Part Number: 146130-8
• Description: Conn Unshrouded Header HDR 18 POS 2.54mm Solder ST SMD
• Manufacturer: TE Connectivity
• Type: Unshrouded Headerr

Specifications of 146130-8

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 18
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Product Type: Connector
• Mount Angle: Vertical
• Pcb Mount Retention: Without
• Surface Mount Compatible: Yes
• Board Standoff: Without
• Mounting Ears: Without
• Mating Connector Lock: Without
• Breakaway Header: Yes
• Pcb Mounting Orientation: Vertical
• Post Size (mm [in]): 0.64 [.025]
• Mating Post Length (mm [in]): 5.84 [0.230]
• Panel Mount Retention: Without
• Current Rating (a): 3
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 750
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Header Type: Breakaway
• Number Of Positions: 18
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Selectively Loaded: No
• Mount Type: Printed Circuit Board
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Shape: Square
• Contact Base Material: Phosphor Bronze
• Housing Material: Thermoplastic - GF
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Approved Standards: UL E28476, CSA LR7189
• High Temperature Housing: Yes
• Temperature Range (°c): -65 – +125
• High Temperature Compatible: Yes
• High Speed Serial Data Connector: No

Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
Note: For Post Shunts, contact Tyco Electronics.
Note: All part numbers are RoHS compliant.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
[8.51]
[8.51]
.335
.335
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
[3.40]
.134
[3.40]
.134
(See below.)
Break Line
(See below.)
Break Line
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Break Line
205
5