5-104656-2 TE Connectivity, 5-104656-2 Datasheet - Page 93

• Manufacturer Part Number: 5-104656-2
• Description: Conn Shrouded Header HDR 20 POS 1.27mm Solder ST SMD Tube
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr
• Series: AMPMODUr

Specifications of 5-104656-2

• Pitch: 1.27 mm
• Number Of Rows: 2
• Number Of Contacts: 20
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Connector Type: Stacking
• Pitch Spacing: 1.27mm
• No. Of Contacts: 20
• Row Pitch: 1.27mm
• No. Of Rows: 2
• Contact Termination: Surface Mount Vertical
• Contact: RoHS Compliant
• Contact Material: Copper Alloy
• Rohs Compliant: Yes
• Product Type: Headers
• Stack Height: 8.13 mm
• Mounting Style: Cable
• Mounting Angle: Vertical
• Number Of Positions / Contacts: 20
• Housing Material: Liquid Crystal Polymer (LCP)
• Voltage Rating: 30 VAC
• Current Rating: 1 A to 4 A
• Mount Angle: Vertical
• Pcb Mount Retention: With
• Mating Connector Lock: Without
• Hold-down Post Material: Copper Alloy
• Hold-down Post Plating: Tin (150) over Nickel (50)
• Insulation Resistance (m?): 5,000
• Voltage (vac): 30
• Dielectric Withstanding Voltage (v): 300
• Contact - Rated Current (a): 1 – 4
• Solder Tail Contact Plating: Tin
• Mated Stack Height (vertical) (mm [in]): 8.13 [0.320]
• Number Of Positions: 20
• Pcb Mount Retention Type: Hold Down Post(s)
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Underplate Material: Nickel
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -65 – +105
• Packaging Method: Tube
• Lead Free Status / Rohs Status: Details

1. Place pinless header
2. With bottom of pc board
3. Apply an even, centered
over preinstalled posts
so that post tips start
into header cavities.
supported, place steel
block over header. Steel
block must be wider and
longer than header so
that it covers all four sides
of the header. However,
for headers with latches
pre-assembled, the steel
block must not interfere
with the latches.
force on steel block until
header bottoms on pc
board. If posts are
longer than .545 [13.84],
they may be forced
against the steel block
before the header is fully
seated. In this situation,
extreme caution must be
taken so that posts are
not damaged or pushed
out of the pc board.
93