6-102567-2 TE Connectivity, 6-102567-2 Datasheet - Page 25

• Manufacturer Part Number: 6-102567-2
• Description: Conn Shrouded Header HDR 40 POS 2.54mm Solder ST Thru-Hole
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr
• Series: AMPMODU MOD II Seriesr

Specifications of 6-102567-2

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 40
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Product Type: Headers - Shrouded
• Contact Gender: Pin (Male)
• Number Of Positions / Contacts: 40
• Row Spacing: 2.54 mm
• Mounting Style: Through Hole
• Mounting Angle: Vertical
• Termination Style: Solder
• Housing Material: Thermoplastic, Glass Filled
• Contact Material: Copper Alloy
• Voltage Rating: 250 VAC
• Current Rating: 3 A
• Operating Temperature Range: - 65 C to + 105 C
• Connector Type: Header
• Pcb Mount Retention: Without
• Pcb Mounting Orientation: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Post Size (mm [in]): 0.64 [.025]
• Contact - Rated Current (a): 3
• Voltage (vac): 250
• Dielectric Withstanding Voltage (v): 750
• Termination Resistance (m?): 12
• Insulation Resistance (m?): 1,000
• Termination Post Length (mm [in]): 4.57 [0.180]
• Termination End Plating: Tin over Nickel
• Header Type: Standard
• Centerline (mm [in]): 2.54 [0.100]
• Number Of Positions: 40
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Mating Retention: Without
• Contact Protection: With
• Contact Protection Type: Shrouded
• Assembly Process Feature: None
• Contact Type: Pin
• Contact Plating, Mating Area, Material: Gold (15)
• Contact Shape: Square
• Contact Base Material: Copper Alloy
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Guide Pin
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476, CSA LE7189
• Pcb Thickness, Recommended (mm [in]): 1.40 [0.055]
• Temperature Range (°c): -65 – +105
• Contact Transmits (typical Application): Signal (Data)
• Lead Free Status / Rohs Status: Details

Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
Note: For Post Shunts, contact Tyco Electronics.
Note: All part numbers are RoHS compliant.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
[8.51]
[8.51]
.335
.335
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
[3.40]
.134
[3.40]
.134
(See below.)
Break Line
(See below.)
Break Line
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Break Line
205
5