PIC12HV609-E/MS Microchip Technology, PIC12HV609-E/MS Datasheet - Page 3

• Manufacturer Part Number: PIC12HV609-E/MS
• Description: 1.75KB Flash, 64B RAM, 6 I/O, 8MHz Internal Oscillator 8 MSOP 3x3mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 12Fr

Specifications of PIC12HV609-E/MS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 5
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: FLASH
• Ram Size: 64 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
• Processor Series: PIC12H
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 64 B
• Interface Type: RS- 232 , USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

High-Performance RISC CPU:
• Only 35 Instructions to Learn:
• Operating Speed:
• Interrupt Capability
• 8-Level Deep Hardware Stack
• Direct, Indirect and Relative Addressing modes
Special Microcontroller Features:
• Precision Internal Oscillator:
• Power-Saving Sleep mode
• Voltage Range:
• Industrial and Extended Temperature Range
• Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up
• Brown-out Reset (BOR)
• Watchdog Timer (WDT) with independent
• Multiplexed Master Clear with Pull-up/Input Pin
• Programmable Code Protection
• High Endurance Flash:
• Self Read/ Write Program Memory (PIC12F617
Low-Power Features:
• Standby Current:
• Operating Current:
• Watchdog Timer Current:
 2010 Microchip Technology Inc.
- All single-cycle instructions except branches
- DC – 20 MHz oscillator/clock input
- DC – 200 ns instruction cycle
- Factory calibrated to ±1%, typical
- Software selectable frequency: 4 MHz or
- PIC12F609/615/617: 2.0V to 5.5V
- PIC12HV609/615: 2.0V to user defined
Timer (OST)
Oscillator for Reliable Operation
- 100,000 write Flash endurance
- Flash retention: > 40 years
only)
- 50 nA @ 2.0V, typical
- 11 A @ 32 kHz, 2.0V, typical
- 260 A @ 4 MHz, 2.0V, typical
- 1 A @ 2.0V, typical
Note:
8 MHz
maximum (see note)
Voltage across the shunt regulator should
not exceed 5V.
8-Pin Flash-Based, 8-Bit CMOS Microcontrollers
PIC12F609/615/617/12HV609/615
Peripheral Features:
• Shunt Voltage Regulator (PIC12HV609/615 only):
• 5 I/O Pins and 1 Input Only
• High Current Source/Sink for Direct LED Drive
• Analog Comparator module with:
• Timer0: 8-Bit Timer/Counter with 8-Bit
• Enhanced Timer1:
• In-Circuit Serial Programming
PIC12F615/617/HV615 ONLY:
• Enhanced Capture, Compare, PWM module:
• A/D Converter:
• Timer2: 8-Bit Timer/Counter with 8-Bit Period
- 5 volt regulation
- 4 mA to 50 mA shunt range
- Interrupt-on-pin change or pins
- Individually programmable weak pull-ups
- One analog comparator
- Programmable on-chip voltage reference
- Comparator inputs and output externally
- Built-In Hysteresis (software selectable)
Programmable Prescaler
- 16-bit timer/counter with prescaler
- External Timer1 Gate (count enable)
- Option to use OSC1 and OSC2 in LP mode
- Option to use system clock as Timer1
Pins
- 16-bit Capture, max. resolution 12.5 ns
- Compare, max. resolution 200 ns
- 10-bit PWM with 1 or 2 output channels, 1
- 10-bit resolution and 4 channels, samples
Register, Prescaler and Postscaler
(CV
accessible
as Timer1 oscillator if INTOSC mode
selected
output channel programmable “dead time,”
max. frequency 20 kHz, auto-shutdown
internal voltage references
REF
) module (% of V
DD
)
TM
(ICSP
DS41302D-page 3
TM
) via Two