PIC16LF722A-I/SO Microchip Technology, PIC16LF722A-I/SO Datasheet - Page 49

• Manufacturer Part Number: PIC16LF722A-I/SO
• Description: 3.5 KB Flash, 16 MHz Int. Osc, NanoWatt XLP 28 SOIC .300in TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF722A-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width), 8 Leads
• Processor Series: PIC16LF
• Core: PIC
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

6.2.1
The ANSELA register (Register 6-4) is used to
configure the Input mode of an I/O pin to analog.
Setting the appropriate ANSELA bit high will cause all
digital reads on the pin to be read as ‘0’ and allow
analog functions on the pin to operate correctly.
The state of the ANSELA bits has no affect on digital
output functions. A pin with TRIS clear and ANSEL set
will still operate as a digital output, but the Input mode
will be analog. This can cause unexpected behavior
when executing read-modify-write instructions on the
affected port.
REGISTER 6-4:
 2010 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5-0
Note 1:
U-0
—
ANSELA REGISTER
When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
Unimplemented: Read as ‘0’
ANSA<5:0>: Analog Select between Analog or Digital Function on pins RA<5:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input
U-0
—
ANSELA: PORTA ANALOG SELECT REGISTER
W = Writable bit
‘1’ = Bit is set
ANSA5
R/W-1
ANSA4
R/W-1
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PIC16F/LF722A/723A
ANSA3
R/W-1
(1)
. Digital input buffer disabled.
ANSA2
R/W-1
x = Bit is unknown
ANSA1
R/W-1
DS41417A-page 49
ANSA0
R/W-1
bit 0