SLFDM44H-512JI STEC, SLFDM44H-512JI Datasheet - Page 14

• Manufacturer Part Number: SLFDM44H-512JI
• Manufacturer: STEC
• Type: Flash Diskr

Specifications of SLFDM44H-512JI

• Density: 512MByte
• Operating Supply Voltage (typ): 5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Mounting: Screw
• Pin Count: 44
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Programmable: Yes
• Lead Free Status / RoHS Status: Not Compliant

SLFDM(40/44)(LP)(V/H)-xxxJ(I)
Drive/Head Register
This register select the device address translation (CHS or
LBA) and provides head address (CHS) or high order
address bits 27:24 for LBA.
bit Name
7
6
5
4
3-0 Head Number (HS3-HS0)
bit7
1
1
LBA
1
DRV (DRiVe select)
bit6
LBA
bit5
1
bit4
DRV
Function
This bit is set to “1”.
LBA is a flag to select either Cylinder/Head/Sector (CHS) or Logical Block
Address (LBA) mode. When LBA=0, CHS mode is selected. When LBA=1, LBA
mode is selected. In LBA mode, the Logical Block Address is interrupted as
follows:
LBA07-LBA00: Sector Number Register D7-D0
LBA15-LBA08: Cylinder Low Register D7-D0
LBA23-LBA16: Cylinder High Register D7-D0
LBA27-LBA24: Drive/Head Register bits HS3-HS0
This bit is set to “1”.
This bit is used for selecting the Master (drive 0) and Slave (drive 1) in
Master/Slave organization. The drive is set to be drive 0 or 1 by using DRV# of
the Socket and Copy register.
These bits are used for selecting the Head number. Bit 3 is MSB. In LBA mode,
these bits represent the LBA address 27:24.
bit3
Head No. or LBA bits 27:24
bit2
Document Part Number 61000-02832-113 March 2005
bit1
FLASH DISK MODULE
bit0
Page 14