PS9613-A California Eastern Labs, PS9613-A Datasheet - Page 12

• Manufacturer Part Number: PS9613-A
• Manufacturer: California Eastern Labs

Specifications of PS9613-A

• Number Of Elements: 1
• Input Type: DC
• Baud Rate: 1000Kbps
• Forward Voltage: 2.1V
• Forward Current: 25mA
• Output Current: 15mA
• Package Type: PDIP
• Operating Temp Range: -40C to 100C
• Power Dissipation: 100mW
• Propagation Delay Time: 750ns
• Pin Count: 8
• Mounting: Through Hole
• Reverse Breakdown Voltage: 3V
• Operating Temperature Classification: Industrial
• Output Type: Open Collector
• Isolation Voltage: 5000Vrms
• Current Transfer Ratio: 110%
• Lead Free Status / RoHS Status: Compliant

NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Cautions
2. Cautions regarding noise
12
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Fluxes
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10073EJ02V0DS
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C
PS9613,PS9613L