1-5145169-2 TE Connectivity, 1-5145169-2 Datasheet - Page 3

• Manufacturer Part Number: 1-5145169-2
• Description: CONNECTOR ASSEMBLY, DUAL POSITIONS, .050
• Manufacturer: TE Connectivity

Specifications of 1-5145169-2

• Pcb Mounting Orientation: Vertical
• Number Of Dual Positions: 92
• Pcb Mount Style: Through Hole
• Holddown Material: Brass
• Holddown Plating: Tin over Nickel
• Voltage (vac): 5
• Termination Post Length (mm [in]): 3.56 [0.140]
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 184
• Centerline (mm [in]): 1.27 [0.050]
• Bus Width: 64 Bit
• Pcb Mount Retention Type: Hold Down Post(s)
• Ejector: Without
• Number Of Holddowns: 3
• Family Name: PCI
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Housing Color: White
• Housing Material: Thermoplastic - GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant

Unm ating force.
Therm al shock.
Hum idity/tem perature cycling.
Tem perature life.
Mixed flowing gas.
Rev D
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
0.5 ounce m inim um per contact
pair.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirem ent
TE Spec 109-35.
Measure force necessary to unm ate
printed circuit board from sam ples
at m axim um rate of .5 inch per
m inute.
TE Spec 109-22.
Subject unm ated sam ples to 5
cycles between -55 and 85°C.
TE Spec 109-23-3, Condition B.
Subject unm ated sam ples to 10
cycles between 25 and 65°C at 95%
RH.
TE Spec 109-43.
Subject m ated sam ples to
tem perature life at 85°C for 1000
hours.
TE Spec 109-85-2.
Subject m ated sam ples to
environm ental class II for 14 days.
Procedure
108-14034
3 of 6