1217955-1 TE Connectivity, 1217955-1 Datasheet - Page 2

• Manufacturer Part Number: 1217955-1
• Description: .187 FAST FL AMVAR 0157 TPBR
• Manufacturer: TE Connectivity

Specifications of 1217955-1

• Product Type: Terminal
• Terminal Type: Receptacle
• Mating Area Interface Dimensions (mm [in]): 4.75 x 0.81 [.187 x .032]
• Receptacle Style: Flag
• Insulation Support: Insulation Support
• Wire/cable Type: Magnet Wire
• Insulation Diameter (mm [in]): 0.51-1.02 [.020-.040]
• Insertion Force: Normal
• Finish: Tin
• Crimp Type: F-Crimp
• Proprietary Name: AMPLIVAR
• Board Mount: No
• Weld Tab: Without
• Wire Range (mm [awg]): 0.80-2.00² [18-14]
• Stock Thickness (mm [in]): 0.41 [0.016]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

3.3.
3.4.
3.5.
Rev D
Initial examination of product.
Final examination of product.
Low level contact resistance.
Temperature rise vs current.
Current cycling.
Vibration, random.
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 240 volts AC
Current: See Figure 4 for applicable current carrying capability
Temperature:
-40 to 105
Meets requirements of product
drawing.
Meets visual requirements.
2.5 milliohms maximum.
)
30
specified current.
Temperature rise of the conductor
during the 500
more than 15
temperature rise during the 24
cycle, and neither rise shall be
more than 85
No discontinuities of 1 microsecond
or longer duration.
See Note.
R 2.0 milliohms maximum.
/
C
/
C maximum temperature rise at
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
/
/
C higher than the
C .
th
cycle shall not be
th
EIA-364-18.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-70,
Method 1.
Stabilize at a single current level
until 3 readings at 5 minute
intervals are within 1
See Figure 4.
EIA-364-55.
Subject specimens to 500 cycles of
45 minutes current ON and 15
minutes current OFF.
See Figure 4.
EIA-364-28,
Test Condition VII,
Condition D.
Subject mated specimens to 3.10
G's rms between 20-500 Hz. 15
minutes in each of 3 mutually
perpendicular planes.
See Figure 5.
Procedure
/
C .
108-2086
2 of 6