1241381-1 TE Connectivity, 1241381-1 Datasheet - Page 3

• Manufacturer Part Number: 1241381-1
• Description: MCP1.5 SOCKET CONTACT SWS
• Manufacturer: TE Connectivity
• Series: HDSCS, Multiple Contact Point (MCP)r

Specifications of 1241381-1

• Product Type: Contact
• Mating Area Interface Dimensions (mm [in]): 1.50 x 0.60 [.059 x .024]
• Wire/cable Type: Regular Wire
• Insulation Support: With
• Wire Range (mm [awg]): 0.50-1.00² [20-17]
• Single Wire Sealing System: Yes
• Insulation Type: FLR (Thin Walled Cable)
• Cantilever Spring Material: Stainless Steel
• Contact Type: Socket
• Contact Base Material: CuNiSi
• Contact Plating, Mating Area, Material: Pre-Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.40 – 2.10 [0.055 – 0.083]
• Applies To: Wire/Cable
• Packaging Method: Loose Piece
• Packaging Quantity: 500

AMP MCP Interconnection System
Contact Systems
Introduction
The AMP MCP Contact
System is mainly used in the
automotive industry. Each
contact consists of a flat
receptacle, which mates
with a flat tab. Every contact
has got a steel spring and a
copper alloy body.
The two-piece contact design
means that the electrical and
mechanical properties are
separated. One end of the
contact body is crimped to
wire and the other end mates
with the matching tab. The
closed spring has got several
functions and also different
advantages for the complete
contact system.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
I
I
I
I
I
I
I
In addition there are usually
two lances on the steel to
spring. These serve to lock
the contact securely in the
housing.
Protection of the contact
springs
No over elongation of the
contact springs possible
under normal circum-
stances
No possibility to connect
from the rear side
Protection against
mechanical damage
Good guiding in the cavity
Secondary locking possible
(from 4 directions)
Assembly into housing
fully-automatically
The Main Advantages
of the Body are:
G
G
G
G
Tabs and receptacles can be
applied in both sealed and
unsealed connectors.
AMP MCP contacts can
be fast and economically
arranged to the lead using
Tyco Electronics application
tooling.
Several contact points
Large range of wire sizes
(from 0.2 mm
1.5K up to 16.0 mm
AMP MCP 9.5)
Base material with very high
current capability
High vibrational load
Main Catalog 1654400-1
Chapter 3 – Issued
2
Revised
at AMP MCP
2
12-2009.
at
3-2010.
3-3