2-111494-0 TE Connectivity, 2-111494-0 Datasheet - Page 3

• Manufacturer Part Number: 2-111494-0
• Description: 030 UNIV I/O 30DP SLOT LTCH
• Manufacturer: TE Connectivity
• Series: Universal I/Or

Specifications of 2-111494-0

• Product Line: AMP-LATCH
• Connector Type: Connector Assembly
• Shrouded: Yes
• Termination Method To Wire/cable: IDC
• Ul File Number: E28476
• Csa File Number: LR 7189
• Mating Post Length (mm [in]): 6.10 [0.240]
• Panel Mount Retention: With
• Panel Mount Retention Type: Mounting Ear(s)
• Contact - Rated Current (a): 1
• Operating Voltage Reference: AC
• Operating Voltage (vac): 250
• Wire/cable Size (awg): 26 – 28
• Wire/cable Size (mm²): 0.08 – 0.15
• Wire/cable Size (cma): 158 – 296
• Profile Height (y-axis) (mm [in]): 23.75 [0.935]
• Number Of Positions: 30
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Rows: 2
• Mating Retention: With
• Length (x-axis) (mm [in]): 62.89 [2.476]
• Width (z-axis) (mm [in]): 8.38 [0.3299]
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold Flash over Palladium Nickel or Gold (30) over Nickel
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.762 [30]
• Tail Plating Material: Matte Tin
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 250
• Operating Temperature (°c [°f]): -65 – +105 [-85 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.81 – 0.97 [0.032 – 0.0381]
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Tray

Thermal shock.
Humidity-temperature
cycling.
Mixed flowing gas.
Temperature life.
Rev A
NOTE
Test Description
(a)
(b)
(c)
Shall meet visual requirements, show no physical damage, and shall
meet requirements of additional tests as specified in test sequence in
Figures 2.
Termination resistance, durability and mating and unmating force are a
function of mating receptacle connectors. When tested using AMP-
LATCH receptacle connectors, these connectors will perform to same
requirements specified for mating receptacle connectors in Product
Specification 108-40000 with compatible plating. TE cannot be
responsible for termination resistance, durability and mating and
unmating force when mated to other than TE receptacle connectors.
Continuous current rating for individual contacts cannot be applied
directly to number of contacts as they are dependent on thermal and
physical properties of material. System design shall assure that
continuous current rating does not create internal hot spots that exceed
temperature designated by connector specification during steady state or
transient conditions.
See Note (a).
See Note (a).
See Note (a).
See Note (a).
ENVIRONMENTAL
Figure 1 (end)
Requirement
Subject unmated connectors to 5
cycles between -65 and 105° C.
Test Specification 109-22.
Subject unmated connectors to 10
humidity-temperature cycles
between 25 and 65°C at 95% RH.
Test Specification 109-23-4,
Condition B.
Subject mated connectors to
environmental class III for 20 days
for 15 and 30 microinch gold
plating. Test Specification 109-85-
3.
Subject mated connectors to
temperature life at 105° C for 500
hours. Test Specification 109-43.
Procedure
108-1336
3 of 6