213841-2 TE Connectivity, 213841-2 Datasheet - Page 5

• Manufacturer Part Number: 213841-2
• Description: POWERBAND PIN CNT
• Manufacturer: TE Connectivity
• Series: .125 POWERBAND Contactr

Specifications of 213841-2

• Rohs Compliant: YES
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Grade: Commercial
• Retention Clip Plating: Nickel
• High Current: No
• Termination End Plating: Gold Flash
• Pin Diameter (mm [in]): 3.18 [0.125]
• Wire Range (mm [awg]): 5.00-8.00² [10 - 8]
• Retention Clip: With
• Retention Clip Material: Phosphor-Bronze
• Used With: CPC Connectors, Metrimate Connectors
• Contact Type: Pin
• Contact Classification: Power
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Copper
• Contact Size: 8
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Test Current (a): 50.0
• Packaging Method: Strip

4.3.
4.4.
Rev B
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
NOTE
No straight posted header is required with Paddleboard which solders directly to the
printed circuit board.
Low Level Contact Resistance Measurement Points
Figure 3
108-1109
5 of 6