AD6644ASTZ-65 Analog Devices Inc, AD6644ASTZ-65 Datasheet - Page 14

• Manufacturer Part Number: AD6644ASTZ-65
• Description: IC ADC 14BIT 65MSPS CMOS 52-LQFP
• Manufacturer: Analog Devices Inc

Specifications of AD6644ASTZ-65

• Data Interface: Parallel
• Number Of Bits: 14
• Sampling Rate (per Second): 65M
• Number Of Converters: 4
• Power Dissipation (max): 1.3W
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -25°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 52-LQFP
• Resolution (bits): 14bit
• Sampling Rate: 65MSPS
• Input Channel Type: Differential
• Supply Voltage Range - Digital: 3V To 3.6V
• Supply Current: 245mA
• Number Of Elements: 1
• Resolution: 14Bit
• Architecture: Pipelined
• Sample Rate: 65MSPS
• Input Polarity: Unipolar
• Input Type: Voltage
• Rated Input Volt: ±1.1V
• Differential Input: Yes
• Power Supply Requirement: Analog and Digital
• Single Supply Voltage (typ): 5V
• Single Supply Voltage (min): 4.85V
• Single Supply Voltage (max): 5.25V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Power Dissipation: 1.5W
• Differential Linearity Error: -1LSB/1.5LSB
• Integral Nonlinearity Error: ±0.5LSB(Typ)
• Operating Temp Range: -25C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 52
• Package Type: LQFP
• Input Signal Type: Differential
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

AD6644
Spurious-Free Dynamic Range (SFDR)
The ratio of the rms signal amplitude to the rms value of
the peak spurious spectral component. The peak spurious
component may or may not be a harmonic. Reported in
either dBc (that is, degrades as signal level is lowered), or
dBFS (always related back to converter full scale).
Two-Tone Intermodulation Distortion Rejection
The ratio of the rms value of either input tone to the rms value
of the worst third-order intermodulation product; reported in dBc.
Rev. D | Page 14 of 24
Two-Tone SFDR
The ratio of the rms value of either input tone to the rms value
of the peak spurious component. The peak spurious component
may or may not be an IMD product. Reported in either dBc
(that is, degrades as signal level is lowered), or in dBFS (always
related back to converter full scale).
Worst Other Spur
The ratio of the rms signal amplitude to the rms value of the
worst spurious component (excluding the second and third
harmonics) reported in dBc.