521633-2 TE Connectivity, 521633-2 Datasheet - Page 3

• Manufacturer Part Number: 521633-2
• Description: 250 ULTRA-POD FLAG 18-14 TPBR
• Manufacturer: TE Connectivity

Specifications of 521633-2

• Proprietary Name: Ultra-Pod
• Receptacle Style: Flag
• Mating Area Interface Dimensions (mm [in]): 6.35 x 0.81 [.250 x .032]
• Insulation Diameter (mm [in]): 2.79-4.06 [.110-.160]
• Insertion Force: Normal
• Finish: Tin
• Insulation Support: Insulation Support
• Color: Natural
• Fully Insulated: Yes
• Wire Range (mm [awg]): 0.80-2.00² [18-14], (2) 0.85-0.89; [(2) 20], (2) 0.80-0.90² [(2) 18]
• Ul Flammability Rating: UL 94V-0
• Housing Material: Nylon 6/6
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| | |
|
Current cycling.
Crim p tensile.
Durability.
Contact retention, Condition A.
Contact retention, Condition B.
Engagem ent/disengagem ent force. See Figure 6.
Hum idity/tem perature cycling.
Tem perature life.
Heat age, Condition A.
Heat age, Condition B.
Rev D
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and shall meet requirements of
additional tests as specified in the test sequence in Figure 2.
Tem perature rise, ∆ tem perature
rise, and voltage drop.
See Figure 5.
24 and 500 cycles.
See Note.
Contacts shall not dislodge from its
insulator at a force of less than 10
pounds m inim um for 187 and 250
product, and 8 pounds m inim um for
110 product.
Contacts shall not dislodge from its
insulator.
See Note.
See Note.
See Note.
See Note.
W ire Size
(AW G)
22
20
18
16
14
12
10
ENVIRONMENTAL
MECHANICAL
Figure 1 (end)
Requirem ent
(Lbs m inim um )
Crim p Tensile
13
20
30
50
70
80
8
TE Spec 109-51, Condition F,
Test Method 4.
Subject m ated contacts to 500
cycles for 45 m inutes ON and 15
m inutes OFF.
TE Spec 109-16.
Determ ine crim p tensile at a
m axim um rate of 1 inch per m inute.
TE Spec 109-27.
Mate and unm ate connector
assem blies for 6 cycles at a
m axim um rate of 600 cycles per
hour.
TE Spec 109-30.
Measure force necessary to pull a
fully seated contact out of housing.
UL-310.
Apply a 5 pound force to a fully
seated contact for 1 m inute.
TE Spec 109-42.
Engage and disengage term inals
and tabs 6 tim es.
TE Spec 109-23-3, Condition B.
Subject m ated connectors to 10
hum idity/tem perature cycles
between 25 and 65°C and 95% RH.
TE Spec 109-43, Test level 9,
Test duration I.
Subject m ated connectors to 118 ±
2°C for 33 days.
Subject wired term inals to 136°C for
7 days.
Subject wired term inals to 180°C for
7 days.
Procedure
108-1285
3 of 7