794630-8 TE Connectivity, 794630-8 Datasheet - Page 4

• Manufacturer Part Number: 794630-8
• Description: PLUG & SOCKET CONNECTOR, PLUG, 8POS, 3MM
• Manufacturer: TE Connectivity

Specifications of 794630-8

• Peak Reflow Compatible (260 C): No
• Body Material: Nylon
• Leaded Process Compatible: No
• Mounting Type: Straight PCB Thru-Hole
• Connecting Termination: PCB Thru Hole
• Connector Type: Plug & Socket
• Rohs Compliant: No
• Product Type: Plug Housings
• Number Of Positions / Contacts: 8
• Mount Angle: Vertical
• Mount: Printed Circuit Board
• Pcb Mount Alignment: Without
• Product Line: Micro MATE-N-LOK
• Mating Retention Type: Latching
• Voltage (vac): 250
• Current Rating (a): 5
• Termination Method: Solder
• Termination Post Length (mm [in]): 3.18 [0.125]
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 8
• Number Of Rows: 2
• Row-to-row Spacing (mm [in]): 3.00 [0.118]
• Centerline (mm [in]): 3.00 [0.118]
• Pcb Mount Retention Type: Compliant Posts
• Mating Retention: With
• Contact Type: Pin
• Contact Termination Type: Through Hole
• Contact Layout: Double-Row
• Contact Plating, Mating Area, Material: Tin-Lead
• Contact Base Material: Brass
• Connector Style: Plug
• Housing Material: High Temperature Nylon
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Lead Free Status / Rohs Status: No

Crimp contact insertion force.
Mating force (contacts only).
Unmating force (contacts only).
Housing lock strength.
Thermal shock.
Humidity/temperature cycling.
Temperature life.
Mixed flowing gas.
Rev D
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
0.7 kg [1.5 lb] maximum.
See Note.
0.7 kg [1.5 lb] maximum per
contact.
0.07 kg [0.15 lb] minimum per
contact.
2.7 kg [6 lb] minimum.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-41.
Measure force necessary to insert
crimped contacts into housing.
EIA-364-13.
Measure axial force necessary to
mate specimens without locking
latches at a maximum rate of 5.08
mm [.2 in] per minute.
EIA-364-13.
Measure axial force necessary to
unmate specimens without locking
latches at a maximum rate of 12.7
mm [.5 in] per minute.
EIA-364-98.
Determine housing lock strength at
a maximum rate of 12.7 mm [.5 in]
per minute.
EIA-364-32, Test Condition VIII.
Subject specimens to 5 cycles
between -40 and 105° C.
EIA-364-31, Method III.
Subject specimens to 10 cycles (10
days) between 25 and 65° C at 80 to
100% RH.
EIA-364-17, Method A, Test
Condition 4, Test Time Condition C.
Subject mated specimens to 105° C
for 500 hours.
EIA-364-65, Class IIA.
Subject mated specimens to
environmental Class IIA for 20 days.
Procedure
108-1836
4 of 7