794630-8 TE Connectivity, 794630-8 Datasheet - Page 6

• Manufacturer Part Number: 794630-8
• Description: PLUG & SOCKET CONNECTOR, PLUG, 8POS, 3MM
• Manufacturer: TE Connectivity

Specifications of 794630-8

• Peak Reflow Compatible (260 C): No
• Body Material: Nylon
• Leaded Process Compatible: No
• Mounting Type: Straight PCB Thru-Hole
• Connecting Termination: PCB Thru Hole
• Connector Type: Plug & Socket
• Rohs Compliant: No
• Product Type: Plug Housings
• Number Of Positions / Contacts: 8
• Mount Angle: Vertical
• Mount: Printed Circuit Board
• Pcb Mount Alignment: Without
• Product Line: Micro MATE-N-LOK
• Mating Retention Type: Latching
• Voltage (vac): 250
• Current Rating (a): 5
• Termination Method: Solder
• Termination Post Length (mm [in]): 3.18 [0.125]
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 8
• Number Of Rows: 2
• Row-to-row Spacing (mm [in]): 3.00 [0.118]
• Centerline (mm [in]): 3.00 [0.118]
• Pcb Mount Retention Type: Compliant Posts
• Mating Retention: With
• Contact Type: Pin
• Contact Termination Type: Through Hole
• Contact Layout: Double-Row
• Contact Plating, Mating Area, Material: Tin-Lead
• Contact Base Material: Brass
• Connector Style: Plug
• Housing Material: High Temperature Nylon
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Lead Free Status / Rohs Status: No

4.
4.1.
4.2.
4.3.
4.4.
Rev D
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. All test groups shall each consist of a minimum of 5
specimens.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
108-1836
6 of 7