DS1267-010 Maxim Integrated Products, DS1267-010 Datasheet - Page 3

• Manufacturer Part Number: DS1267-010
• Description: IC POT DUAL DIGITAL 10K 14-DIP
• Manufacturer: Maxim Integrated Products

Specifications of DS1267-010

• Taps: 256
• Resistance (ohms): 10K
• Number Of Circuits: 2
• Temperature Coefficient: 750 ppm/°C Typical
• Memory Type: Volatile
• Interface: 3-Wire Serial
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: 14-DIP (0.300", 7.62mm)
• Resistance In Ohms: 10K
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: DS1267010

DS1267
DS1267 BLOCK DIAGRAM Figure 1
I/O SHIFT REGISTER Figure 2
Transmission of data always begins with the stack select bit followed by the potentiometer-1 wiper
position value and lastly the potentiometer-0 wiper position value.
When wiper position data is to be written to the DS1267, 17 bits (or some integer multiple) of data should
always be transmitted. Transactions which do not send a complete 17-bits (or multiple) will leave the
register incomplete and possibly an error in the desired wiper positions.
After a communication transaction has been completed, the
signal input should be taken to a low
RST
state to prevent any inadvertent changes to the device shift register. Once
has reached a low state,
RST
the contents of the I/O shift register are loaded into the respective multiplexers for setting wiper position.
A new wiper position will only engage after a
transition to the inactive state. On device power-up
RST
the DS1267 wiper positions will be set at 50% of the total resistance or binary value 1000 0000.
3 of 12
102199