EMC6D102-CZC-TR Standard Microsystems (SMSC), EMC6D102-CZC-TR Datasheet - Page 17

• Manufacturer Part Number: EMC6D102-CZC-TR
• Manufacturer: Standard Microsystems (SMSC)

Specifications of EMC6D102-CZC-TR

• Operating Current: 3mA
• Operating Temperature Classification: Commercial
• Package Type: SSOP
• Lead Free Status / Rohs Status: Compliant

Fan Control Device with Hardware Monitoring and Acoustic Noise Reduction Features
Datasheet
SMSC EMC6D102
Note: The INT# signal is an alternate function on the PWM2 and TACH3 pins. The EMC6D102 device
will respond to the SMBus Alert Response address even if the INT# signal is not selected as
the alternate function on one of these pins as long as the following conditions exist: the INTEN
bit (register 7Ch bit 2) is set, an individual status bit is set in one of the interrupt status
registers, and the corresponding group enable bit is set. Each interrupt event must be enabled
into the interrupt status registers, and the status bits must be enabled onto the INT# signal via
the group enable bits for each type of event (i.e., temperature, voltage and fan). See the
section titled
Interrupt Status Registers on page
DATASHEET
17
21.
Revision 0.4 (09-25-07)